Lee’s Summit, MO HVAC, Plumbing & Electrical Services

Completed furnace, maintenance and inspection. I checked amp draws and components. I tested airflow and temp splits. I cleaned flame sensor and wiped down furnace. I replaced air filter with customer provided air filter. There is a lot of drywall/construction dust throughout the ductwork and system. I showed customer photos and explained how that dust can continue to infiltrate the furnace and cause issues in the future. Customer would like to talk with spouse about the duct cleaning options. Furnace is running within manufacturer specifications at departure.

Arrived for furnace check on two systems. Both are passing static. Heat exchangers look good. Carbon monoxide tests were 0ppm. All electrical is in range. There is a good temperature rise on both. Blower wheels are clean. Today I replaced all filters and humidifier pads. Systems are running at departure. Thanks for choosing LBA.

Today the blower motor was replaced in the suspended unit (s/n ending 9902). The unit was operated and the system was checked. This is a twin system and both units were operated at the same time to check heating function temperatures. The split temp was elevated and there were multiple supply diffusers taped off. The tape was removed to increase airflow and bring the temperature back into proper range. In addition to this the new motor was matched with a new and tested capacitor and while the blower assembly was out of the furnace it was cleaned with compressed air. The furnace is operating within the manufacturer’s specifications. Thank you, Jon

Performed annual plumbing inspection of the home. Customer mentioned she had a drip coming from her faucet and won’t stop. We would need to rebuild faucet. Noticed that PRV is starting to show signs of failure. Current pressure is at 55psi however water pressure drops significantly when using more than one fixture and toilet being flushed. Customer also made mention of hot water taking long time for bathroom upstairs and kitchen. Informed customer we could install a recirculating pump on top of storage tank and install a crossover valve in upstairs bathroom. This way we can get faster hot water delivery times and less waste of water. Will send customer estimates.

Arrived for furnace check today. Static is passing. Heat exchanger looks good. Carbon monoxide test was 0ppm. Blower wheel is good. All electrical is running in spec. Filter was changed today. System is running upon departure. Thanks for choosing LBA.

Quoted work to be done she wants to talk to her husband before hand

Completed furnace maintenance and inspection. I cleaned flame sensor and wipe down furnace. I checked amp draws and tested components. I tested airflow and temp splits. Furnace is operating within manufacture specifications.

Estimate

Completed furnace, maintenance and inspection. I wiped down the furnace and cleaned flame sensor. I checked amp draws and tested components. I tested airflow and temp splits. Furnace is operating within manufacture specifications. I have no concerns with furnace at this time. Furnace is operational at departure Spoke with customer about surge protection for the whole home or for the HVAC system. They would like to talk it over and think about what they would like to do.

Completed furnace maintenance and discussed/quoted zoning system.

Arrived to do a performance maintenance. Set up for temperature split and static pressure tests. Verified operation of all mechanical and electronic components of the air handler. Verified operation of the heat pump and the electric heat strips. Checked blower for cleanliness and to see if there is any play in the bearings. Checked cleanliness of the indoor coil. Moved inspection outside. Found heat pump coil clean. Verified operation of the heat pump components. Wiped system down. Air handler filter will need replaced eventually but today it has plenty life left in it. System is functioning properly at this time.

..

Completed furnace maintenance on both systems. I checked all components and amps. I tested airflow and temp splits. I inspected the heat, exchanger and cleanliness of coils and blowers. Main floor furnace runs quite a bit more than the upstairs furnace so with the extra usage and moisture that has gotten on the system, the main floor furnace is in a rougher shape than the upstairs furnace. Upstairs furnace looks great, except for the dirty blower and blower wheel. When testing for carbon monoxide, I found none and I found no cracks or holes in the exchangers. The furnace exhaust connects from both furnaces and is rusted at multiple points to where if I were to push on the rust firmly I could push right through it. Spoke with homeowner about the exhaust and what could happen if they develop holes or fall apart. Homeowner has a home warranty that needs to approve repairs first.

Installed homeowner supplied stat.

Arrived to remedy an inoperable system. Upon inspection of the system, found that the air handler would operate and cool the house, but would not do that with commands from the thermostat. Removed power from the system and removed the ecobee from the wall. Jumped the thermostat wires to ensure that everything outside of the thermostat is operating as it should. Air handler is heating and cooling as designed without the thermostat. Built estimate to replace thermostat with a communicating system. Install team will be out tomorrow to rewire and install the communicating thermostat.

Dispatched for possible repair on reversing valve solenoid coil. After arrival and further investigation into the issue it was determined that another company has provided multiple services and changed out the indoor coil in May 2025 and in February before the coil was replaced there was refrigerant add to the system. The other company came out a few weeks ago and diagnosed that the system had a leak in the outdoor unit and that they can repair the issue but there is possibly other issues. The other company recommended for replacement of the system or repair with no guarantee that it would not happen again. That is when they also recommended that LBA services can also be called out to fix the issue since we installed the system in 2020, and that it has parts warranty. Any company can file a parts warranty. Thank you for allowing us in your house to provide the perfect home service from your LBA Lead Service tech Calvin.

York Full system install W/ New drop and boot, furnace box, FLU. New ecobee stat with room sensors for upstairs problem rooms. 10/10 parts/labor warranty. 1 year of membership on the house AHRI-217589611

Rtp

B

.

B

Evaluation completed with customer. Will upload pictures on wear and tear on system. Coil is rusted on system. Drain pan is full with water. Leaking into heat exchanger. Hence for all the rust forming through the years. Supervisor will have solutions for customer. Thank you for choosing LBA services-Johann

….

9-18-25 change my call for service call

Install a transformer for the zone board, also installed a new thermostat on the second floor. All zones are working correctly and the system is operational. The water heater is release pressure from the pressure safety device. This is indicated the water heaters pressure is to high from to much sediment on the burner part of the water heater. Thank you for allowing us in your house to provide the perfect home service and for being a member of the perfect family service club from your LBA Service tech Calvin. If I provided a positive or five star experience. I’d appreciate you sharing your thoughts in a review.