Lee’s Summit, MO HVAC, Plumbing & Electrical Services

Completed furnace, maintenance and inspection. I checked all components and amp draws. I wiped system down. I checked wire connections. System is working properly at this time.

Customer called in needing two tankless water heaters replaced. Both tankless are located upstairs in utility room. Spoke with customer and customer has 4 bathrooms and only 3 people live in the house. Got a second opinion from manager and both us believe that customer doesn’t need two tankless and can get away with only having one. We will be providing Navien 240A2 with a built in recirculating pump. Our price includes remove and haul away of old unit and any repiping of the gas, water, & flue.

Sold and scheduled duct cleaning

Customer called in needing kitchen drain augured. Customer mentioned that kitchen backed up a few months ago and it backed up again. Informed customer we will need to augur drain line snd figure out what is going on. Customer is on slab and has pvc drain lines. Took tries to get line open. Line was filled with grease build up. Informed customer if drain. Backs up again in less than a year time, will highly recommend jetting kitchen drain line. No warranty.

Went over different options for duct cleaning and blower wheel cleaning . Customer has 3 other bids

Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Verified operation of all mechanical and electronic components of the furnace. Checked blower for cleanliness and to see if there is any play in the bearings. Found that the fan for heating and cooling is collecting dust debris. Checked systems heat exchanger to ensure proper venting of flue gas. Furnace is operational at this time.

Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Found that the system is operating just above the systems maximum rated static pressure. Verified operation of all mechanical and electronic components of the furnace. Checked blower for cleanliness and to see if there is any play in the bearings. Found that the furnace fan is excessively dirty considering the age of the equipment. Checked the systems ductwork and found it heavily coated in dust debris. Checked systems heat exchanger to ensure proper venting of flue gas. Verified operation of the humidifier. Spoke with homeowner about the system. With homeowners approval replaced the furnace filter and humidifier panel as well as signing up for the maintenance membership. Furnace and humidifier are operational at this time.

When I arrived, I turned the AC on at the thermostat however the AC did not kick on to run. I connected to the system through an app on my phone and found that the AC unit was not communicating with the furnace. I then went outside and saw an error code on the AC. The error code stated that the AC was low on refrigerant. I went ahead and restarted the system, and then the AC came on and was running, so I checked refrigerant pressures. The temperature outside is too cold to properly check refrigerant however I am able to get a good idea on refrigerant levels. Refrigerant pressure check shows that the unit should be OK on refrigerant. The communication error is normally the control board on the outside unit. Since the furnace works perfectly fine and is connecting properly through the app. I diagnosed that the outside unit control board needs replaced. I talked with customer about options with that. Customer would like to talk with spouse before making any decisions.

Fixed a condensate drain line inside the furnace that was popping off. Measured out the flu pipe and due to the length of flu pipe the furnace needs 3 inch pipe. Installers will be backed out tomorrow morning to run a new flu and fresh air intake.

Fixed flue

Installed new York Y91E100C20SMPS1 96% Furnace and new Thermostat Equipment Warranty 10 Year Parts / 10 Year Labor 2 year membership included

Arrived to remedy an inoperable humidifier. Upon inspection of the humidifier found a red light indicating that the steam canister is not filling with water. Performed diagnostic on the unit and determined that the solenoid valve or fill valve is not allowing water to flow properly. Called Aprilaire tech-support to verify my diagnosis and start the warranty process. Spoke with homeowner about the necessary repair. With homeowners approval performed the replacement of the fill valve. Tested system operations. System is functioning properly at this time.

Returned to move forward pull & reset of toilet along with flange repair. Went ahead and pulled toilet and saw that flange was set below flooring. Went ahead and used flange repair to raise the flange above the flooring. Installed new wax ring along with new stool bolts & caps. Also installed new supply line as well. Flushed toilet multiple times and toilet no longer leaking. 1 year warranty on pull and reset.

Arrived to remedy an inoperable system. Upon inspection of the system found that the furnace would not operate and it was giving a fault code related to the pressure switch. This is a similar issue as yesterday. Performed diagnostic on the pressure switch and venting system. Found that even though the pressure switch is closing and trying to relay its signal, it is not a reliable signal. Without the control board receiving a reliable signal it will not allow the system to operate. Spoke with homeowner and with homeowners approval replaced the pressure switch. Tested system operations. Furnace is functioning properly at this time.

Customer called in needing water heater looked at. Currently water heater is working. Water heater is 12 years old. Customer is the original homeowner and house was built 12 years ago. Customer mentioned that they believe the water heater is starting to go out because they’re getting inconsistent hot water in their master shower. I asked customer if hot water inconsistency is throughout the house or just at their shower. Customer mentioned that they’ve only noticed at their shower that they’re having inconsistency of hot water. Went to look at the upstairs shower and looked at both shower valves. Informed customer that he may be having issues with the showers themselves and may not be a water heater issue. Informed customer that we can definitely start with a rebuild in both shower valves and see if they still have a hot water inconsistency issues. Customer also had me look at a leak they noticed down in their utility room. Leak seems to be coming from toilet check the surrounding floo

Called via phone call. Control board is not operating when calling for heat. Will need to be replaced customer approved. Service scheduled will be appointed for tomorrow.

Arrived to remedy an inoperable system. Upon inspection of the system found it heating the home like normal. Performed diagnostic and found that the inducer bearings are making excessive noise and the inducer is getting abnormally hot. Put together estimates to replace the inducer and verification system, as well as addressing an issue found during the maintenance. With homeowners approval called and ordered the replacement inducer. Had a parts runner retrieve the part. Performed the replacement, making sure to clean any mating surfaces and clear any debris in the flue. Tested system operations after replacement and calibrated the systems gas valve. System is functioning properly at this time.

Went for a maintenance call today for heat. Tested for static pressure system is passing when in heat. All electrical components are passing for manufacture specifications. Did a combustion test is within range. Inspected heat exchanger no cracks/leaks were detected. Checked temp split and is passing for specifications. Did replace filter for customer. Cleaned flame sensor and pressure switch hose. System is up and running before departure. Thank you for choosing LBA services-Johann

Completed furnace, maintenance and inspection. I double checked thermostat to make sure humidifier was set up properly. I then checked out humidifier when I was down by the furnace. Humidifier water pad needs changed out. The humidifier pad size is number 35. There was too much water coming through so I turned down the amount of water Going to the humidifier. I checked out components and amp draws. I cleaned flame sensor and wiped down furnace. I tested air pressure and temp splits. Furnace is operating within manufacture specifications at departure. Smart AC hub was not connected to the Wi-Fi. We reset the hub and it connected properly. The sensors are out of battery. Customer said they would replace them themselves. I reset the alerts for service on the unit and the air filter alert as well.

Plumbing quote

Completed furnace, maintenance and inspection. I cleaned flame sensor and wiped down furnace. I checked components and amp draws. I tested airflow and temp splits. Furnace is operating within manufacture specifications. Scheduled a plumbing visit for tomorrow morning to quote replacing two outdoor faucets.

Completed two system, furnace maintenance and inspection. I cleaned flame sensors and wiped down furnaces. I checked amp draws and components. I tested airflow and temp splits. I changed our air filter with customer provided filter. The main floor furnace will need a new air filter soon since there was no replacement for that one. I checked for carbon monoxide and inspected heat exchanger. Both furnaces are operational at departure.

Completed furnace, maintenance and inspection. I cleaned flame sensor and wipe down furnace. I checked components and amp draws. I tested air pressure and temp splits. Furnace was overheating within about five minutes when I arrived. Upstairs vents were closed and so we opened those back up. I checked blower speeds and gas pressure. Furnace is now running with a 45° temp split instead of 65° temp split. Furnace ran for over 25 minutes before I left.

Went for a heating inspection call today. Tested for static pressure system is passing when in heat. All electrical components are passing for manufacture specifications. Did a combustion test is within range. Inspected heat exchanger no cracks/leaks were detected. Did notice some heat stress in the heat exchanger did inform customer. Checked temp split and is passing for specifications. Cleaned flame sensor and pressure switch hose. System is up and running before departure. Thank you for choosing LBA services-Johann

Performed A/C checks on 2 twinned split-systems - updated NTE price of $270 was approved by Shannon for both units. The units were checked for cooling functions and the accompanying checklists from the client were completed. Info for this site was gathered and emailed. The west condenser has a compressor that is cycling on thermal overload. The pressure safety switch for it has been bypassed before my arrival today.