Kansas City, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Kansas City, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Kansas City, KS.
Recent Jobs and Reviews in Kansas City, KS
Kansas City, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Kansas City, KS between October 2024 and November 2024.
The most recent job was on November 4, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 131 jobs in Kansas City, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Went for a furnace maintenance today. Did a static pressure test, it failed. Did a carbon monoxide leak test, there was no leaks. Heat exchanger was In ideal condition. Combustion analysis test passed. Temp split between the supply and return duct passed. Inducer motor amperage was high. Gas pressure met factory specifications. Pressure switch passed. Blower wheel was clean. Blower motor amperage passed. Duct work was dirty. Exhaust is in good working condition. Thank you for choosing LBA services!
Sold full bronze80 system. Financed and installing tomorrow
Quote to diagnose the Lennox unit heater serial 5879F12899 found not heating during the recent heating P.M. Price includes diagnosing only. Repairs will be quoted to the customer for approval after diagnosing the unit.
Came out here for a furnace tuneup upon bravo tested static static was passing second thing on my list was to check the heat exchanger as well as any carbon monoxide readings within the deck system. I was getting a reading of 67 ppm for a constant minute or two here and there and literally jump up from like 1 to 10 to 20 so I did let the customer know that I wanted to have a second set of eyes before you know making a final conclusion so I had supervisor out here retesting and verify that there indeed is carbon monoxide within the deck system check here exchanger, no visible breach within the two cells that we can actually look at but we did see really really really really dark basically overcook spots on the heat exchanger itself which leads us to believe that you know within one of those for cells there has is a breach.
Went for a furnace maintenance call today. Did a static pressure test it passed. Filter is clean. Did a carbon monoxide leak test, there was no leaks. Inducer motor amperage passed. Temperature split between the supply and return duct passed. Gas pressure met factory specifications. Combustion analysis test passed. Pressure switch passed. Blower wheel was clean and blower motor amperage passed. Ductwork was clean. Flu was in good condition. Thank you for choosing LBA services!
Estimate
10/30/24 - Completed a full heating maintenance on three furnaces. Filters were changed and proper operation was tested. Overall, the units were in good condition, they were running well, and there were no issues found at this time.
X
Completed furnace inspection for customer. All aspects of system tested within manufacturer specifications. No recommendations at this time.
CFM is good but static is still high. Customer wants it fixed
Arrived to do a performance maintenance. Set up for combustion analysis and static pressure tests. Found that the system is operating with failing static pressure. Verified operation of all mechanical and electronic components in the furnace. Cleaned the flame sensor and retested its performance. Checked blower for cleanliness and to see if there is any play in the bearings. Checked systems heat exchanger to ensure proper venting of flue gas. Found that the heat exchanger is heat stressed, showing hot spots. Reached out to a field supervisor to verify the wear I was seeing on the heat exchanger. Checked for carbon monoxide in the air stream. Performed an electronic gas leak search. Spoke with homeowner about the system. Furnace is operational at this time.
10/30/24 - Completed a full heating maintenance on three furnaces. Filters were changed and proper operation was tested. Overall, the units were in good condition, they were all running well, and there were no issues found at this time.
Came out for a heating tuneup upon arrival tested static that it was high take a look at the rest of the unit. Everything else was good on the unit itself filter was need a new replacement so we did replace it amps on the inducer fan motor, we’re good as well cleaned out Flame sensor for them as well. Thank you for choosing LB services. ( filter is a Merv 16 carbon clean 20*25*4
*(***6**66**6*(())*’*(****************** Disconnect was off. Checked low voltage wiring and turned unit back on. Unit is moving heat. Confirmed the hx diagnosis while on-site. Small holes and seams starting to seep. Heat is disabled at gas shut-off, w1 and gas valve is off. *(&)*)**)*)*)*)&)&)*)(*)*)*)*)*)
Today I checked the heating and cooling functions of the hvac equipment that serves suite# 1312 and 1314. There are (2) packaged rooftop units, one nat gas split system and one unit heater. Upon arrival I noticed that there is water coming down through the ceiling panels right below the rooftop unit on the west. Above the ceiling panels there is plastic sheeting that has been put up there to prevent the water from dripping down. I was able to determine that the rooftop unit that is dripping was running constantly in cooling mode. This has caused the evap coil to ice over and water has been melting into the unit. Goodman, 80% nat gas, m/n GMS80403ANBC, s/n 1410161710 All units were checked as far as possible with several units having critical issues that are preventing them from fully functioning. Below is the list of deficiencies. Note due to low refrigerant charge on the split system, unit heater not holding a flame and the iced coil w/ a stuck contactor on the west rooftop
Arrived for furnace maintenance today. System is air handler with heat pump. Checked static pressure and found it was way over the manufacturing recommendations. A filed supervisor is out to discuss with you. All electrical components are running properly at this time. The blower is pretty clean. Running amps on compressor and fan are good. Thanks for choosing LBA.
Declined static improvement
Selling
Completed furnace maintenance and inspection. I checked all components and amp draws. I tested airflow and temp splits. Air pressure on furnace is over double the recommended amount. This is causing a lot of strain on the system. I found rust all over the primary heat exchanger. Secondary heat exchanger and blower wheel are covered in dirt. Furnace is running and I did not find a crack or hole in the heat exchanger today however based off the evidence I saw today the furnace could have safety issues at any time. Brought out supervisor to verify findings and figure out what’s going on with the air pressure on the system.
Started heating maintenance on Rtu . Found heat exchanger cracked on the seem of one of the tubes. I shut the gas off to the unit and disconnected w1 wire.
Arrived for furnace maintenance today. All electrical components are running properly at this time. Checked exchanger and found no rust or cracks at this time. Carbon monoxide test was 0 ppm. I changed out the filter. Blower is collecting dust and needs to be cleaned. Option to clean wheel was declined today. System is running upon departure. Thanks for choosing LBA.
Happy call
Duct cleaning
Heating System Repair Service: The client was experiencing weak airflow from their heating system. After diagnosing the issue, I identified a failing blower motor as the cause. I replaced the motor, restoring efficient airflow and ensuring consistent warmth throughout the home during the colder months.
Customer mistakenly scheduled maintenance with us thinking it was with MVP, with whom they have a service agreement. Asked us to leave.