Kansas City, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Kansas City, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Kansas City, KS.
Recent Jobs and Reviews in Kansas City, KS
Kansas City, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Kansas City, KS in October 2024.
The most recent job was on October 25, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 131 jobs in Kansas City, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
When we talked to customer he doesn't want us to look any further bc of his agreement with the other company
10-25-24 On site to do hot water boiler maintenance and seasonal start up. Did find the system pressure was at 30 psi which is causing the pressure relief valve to drip water. The steel expansion tank in the ceiling was completely waterlogged. This would cause the pressure to be too high since this system runs at about 10 psi. The existing expansion tank does not have a drain port, so I had to remove the water out of the glass drain tube, which took some time. There was a standing water on top of the boiler right below the flue pipe, and you can see your water was dripping down from the roof down to the unit. Tyler was on site doing tuneups. I had him take a look at it. There is ponding water around the flue seal, which is probably behind our capacity to seal this so they need to get a roofer. I did let Bob know this. Once I got the expansion tank drained down to a point where I can start the system I turned the circulating pump on the automatic fill valve and the system came out to
10/25/24 - Will need to come back to complete the rest of the maintenance.
Today four unit heaters were checked for proper heating functions and the furnace that serves the office was also checked. In addition to this the filter was replaced in the furnace, the unit heaters were cleaned using compressed air, all equipment was cycled using the thermostats. All equipment checked to today is functioning properly. During the inspections I noticed that the south shop unit heater that is on the North side of the shop has an inducer motor that has a slight bearing noise. This was relayed to Jessica. Also noticed was that the flame signal for the office furnace was slightly low. This was resolved today by cleaning it. Thank you, Jon Tech notes: Unit heaters from South to North #1 (next to new paint area):Lennox m/n LF25-400A-1, s/n 5619L05375, age 5yrs old, unit cleaned with compressed air, blowers 3.14, 3.25, flame sensor 2.7 does shut down flame when disconnected, motor bearings ok, flue pipe good, cycles properly. #2 (South shop, north unit): Lennox,
Upon arrival I began the furnace tune up. I started with a static pressure test. The system is rated for .8 and your system is passing the test at .58 total pressure. Next, I checked the running amps on your inducer and blower motor and both were within specs. I cleaned the flame sensor, cleared the hoses and pressure switches, and cleaned the outside of the furnace and also cleaned the top of the water heater so there is no dust on either one right now. The system has a dirty blower motor that should be cleaned at your earliest convenience. If you have any questions or concerns please feel free to give us a call and have a great weekend ahead! P.S. No payment was owed for todays visit.
Na
Na
Na
Na
Replace duct and furnace
.
X
Replaced compressor and contactor on unit after what appears to be a power related failure, system operating normally at this time.
10/21/24 - Completed a full heating maintenance on one furnace and two unit heaters. The filter was changed and operation was tested on the furnace. Unit heater 3 was working properly at this time, but unit heater 2 was not working at this time. It will need to be looked into further to determine the issue. Other than that, the rest of the equipment was in good condition, it was running well, and there were no further issues found at this time.
Quote to replace the failed heat exchanger in the Lennox package unit serial 5606G04674 marked as #4. Price includes the factory replacement heat exchanger and labor. Repairs covered by a one year parts and labor warranty. The existing heat exchanger is rusted thru exposing the burner flames to the air flow from the blower. The heat mode has been disabled for safety and to prevent possible carbon monoxide from entering the space that this unit conditions. This unit is 18 years old with a life expectancy of 15 years. A quote for unit replacement has been sent to the customer as an option in lieu of repairs.
DATE: 10/18/24 Detailed description of what was done today: arrive at home and spoke with Nathan about reason I was called today, which was a shower that was only getting hot water and not cold. Afternoon for inspection, I created where in tear less which included of a fill valve, shower valve halo, five water softener, filtration, and PRV. He decided to just go forward with the fill valve and shower valve for the time being I didn’t have the parts on me and needed to get home so the job sold for a later day Tuesday 10/22/24. Brady will Return to install. Wear and Tear: -shower valve, fill valve, PRV, and halo 5 After reviewing the entire house I went over everything with Nathan to ensure they understood everything going on in the house and what could be done to address it. Services done today: -Inspection and quote Thank you for choosing LBA Services Your technician, Josiah Walker
Switching to turnover
Out today to install Customer provided smart water shut off. Quoted homeowner 487 minus the $50 coupon for a total of 437, homeowner approved. installed successfully tested no leaks. Cleaned up work area and collected paid with a card.
.
.
Unit heater #3, replace the thermocouple in the pilot assembly. Price includes parts and labor--$265.52 Unit heater #4, replace the broken room thermostat. Price includes parts and labor--$342.88 10-16-2024 replaced thermocouple in unit heater #3. Kicked system on and watched it run properly. Unit heater #4 thermostat was replaced already by customer upon arrival. Both systems are functioning properly at this time
HC complete
Upon arrival I began the furnace tune up. First, I did a static pressure test. Your system is rated for a maximum static pressure of 1.0 and your system passed the test reading at .7 total. Next, I did a CO leak detector check and found ZERO ppm(parts per million). I checked the running amps on the blower and inducer motor and both were within manufacturer specifications. The blower wheel itself looked very clean today. I made sure all the electrical components were secured and working properly. I used my scope camera to look at the Heat exchanger and I didn’t find any holes or cracks in the heat exchanger which is good. The temperature rise is supposed to be between 35 & 65 degrees and your system is reading at 41 degrees which is within specs. Your system is running properly at his time. If you have any questions or concerns please call us. Have a great rest of your week! P.S. Replaced Merv 16 Filter size 20x25x5 inch today and the homeowner had a $50 discount coupon. So payment tota
RTP Saturday morning
Upon arrival I began the furnace tune up. First, I did a static pressure test on the system. The manufacturer sticker shows the maximum static pressure is rated for .5 and your system tested at .52 which is just above the maximum. My Field Supervisor can discuss this with you further. Next, I did a CO test and I found the air to have 9ppm(parts per million). If you look this up online it will tell you between 0 and 9ppm is acceptable but any amount of CO getting into the air stream is dangerous because it will only get worse over time because I found a crack in your Heat Exchanger. Per regulations I have to put a red tag on your furnace and shut the gas off which I have done at this point. The temperature rise was at 49 degrees which is within the specs of between 30 & 60 degrees. My FS Dre has scheduled a follow up appt with you for this coming Saturday between 8 & 10am. If you have any questions or concerns please feel free to contact us. Have a great week!