Kansas City, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Kansas City, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Kansas City, KS.
Recent Jobs and Reviews in Kansas City, KS
Kansas City, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Kansas City, KS in November 2024.
The most recent job was on November 29, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 131 jobs in Kansas City, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Install 720 a humidifier. Install outdoor temperature sensor, Tie in furnace fan.
Arrived to customers for a furnace tuneup in during the inspection we discovered a short CFM Count at the return trunk. All other components met within factory specs.
.
Replace furnace w/base AC and coil. Increased size of drop to 10 x 24. Installed new humidifier and thermostat.
No c/o detected
Upon arrival I began the furnace tune up. First, I did a static pressure test. This system is rated for a maximum of .5 static pressure. When testing the unit, I tested the unit in 1st & 2nd stages. 1st stage was at .5 which is right at the max. Testing in 2nd stage was failing at .74 total. Next, I did a CO test to ensure the furnace is safe to operate. My carbon monoxide detector picked up CO in the supply airflow that is pushing into the home which is unsafe. My Field Supervisor Dre is on his way over to retest what I found and see what needs to be done to make your system safe to use. After Field Supervisor arrived and retested for a CO leak, he found Zero PPM(parts per million). The gas valve was turned up too high and the barometers that sits behind th furnace was closed off making the static pressure too high. So, we lowered it back down within specs and that fixed the high static pressure. If you have any questions or concerns please feel free to call us! Your LBA Technician, T
No charge, no invoice, nada. Customer relations visit. I turned unit off from the indoor breaker, the disconnect was on. Reset the unit, it is running. Cx will call if there is another outage. He is very grateful.
Attempted to reach the make-up air unit with the on-site maintenance person and the on-site scissor lift. Unable to fully reach the controls compartment.
Replaced the 8” inch single wall elbow that had separated on unit heater #4. The unit returned to normal function after the repair was completed. The flue pipe was inspected on unit#1 and after inspection was reattached to the unit. The unit’s filter was changed and it was cycled three times. I checked for carbon monoxide inside of the supply ducts and there was no CO present. This unit is functioning properly at this time. Thank you, Jon Tech notes: unit#1 filter replaced, temp rise 50(122-72), CO in supply Oppm.
Out today for low water pressure due to yellow resin beads as well as replacement of stems in master bathroom. Upon arrival capped off shower valve lines in order to return water to home until we can get specialty stems back out. We will return when we get them and install them as well as flush out. System of any remaining resin beads. Cleaned up work area did not collect. Thank you for choosing LBA services!
Worked with customer on replacing bath tub handles and stems. We will have to order the specific parts. Today the water lines to the bath tub are being capped off to allow water to be turned back on. Also, we advised the customer on water softener replacement as the brine tank is no longer operational.
Sold full system
Upon arrival the homeowner explained that the heat had completely dropped working today. He explained it hasn’t been keeping up all week though. He also mentioned hearing a loud noise coming from the blower motor area of the furnace. Upon inspection I found the liner from the filter box was ripped out and sucked into the blower wheel. That tangled up in the wheel and shut the system down after it tripped out on high limit from fan not blowing. Next, I did a test for CO just to be safe. My meter picked up leaking CO coming from the heat exchanger on the furnace. I got my scope camera and looked over the heat exchanger and found very large “hot spots” which are large burnt looking spots wear the metal has overheated. When the metals expands too far we get a crack leaking carbon monoxide. My Field Supervisor Nick has arrived and is going over all the options with Mario. If you have any questions or concerns please feel free to call us! Your LBA Technician, Tyler Rickard P.S. No payment w
3* Star Duct Restore Coil spacer was added. New plenum was added. Added 45* to side of plenum to existing 8x12 duct. Added 7" supply to the garage. Added new return in ceiling 10' away from burner compartment. Exhausted all options today. LBA stands behind 10 year parts and 10 year labor
Met w/ Andy. New Nick should be reaching out to schedule resolution.
L
L
L
L
Sold
Sold
Sold
Sold
C
Estimate