Kansas City, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Kansas City, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Kansas City, KS.
Recent Jobs and Reviews in Kansas City, KS
Kansas City, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Kansas City, KS in November 2024.
The most recent job was on November 25, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 131 jobs in Kansas City, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Quoted
L
L
L
L
Completed furnace maintenance and inspection. I checked all components and amp draws. I tested airflow and temp splits. I cleaned up furnace, water heater and pulled and cleaned flame sensor. The furnace is running with its max air pressure. The blower wheel has a lot of dirt on it and the ductwork is dirty. Air pressure on the system needs lowered so system doesn’t break down prematurely. The blower wheel and the ductwork need cleaned as soon as possible. I showed customer pictures of readings and blower wheel. Furnace is operating for now at departure.
Estimate
Customer is happy
Upon arrival the homeowner explained she has been smelling gas coming from the furnace. I took my gas leak detector and ran it across all the gas connection points and found the leak at the union. I tightened down the union and then tested for leaks and leak was gone. I showed them my leak detector no longer getting a hit at the union. Gas smell is gone. If you have any questions or concerns please feel free to call us! Your LBA Technician, Tyler Rickard P.S. No payment was due for todays visit. Have a great week!
Reset mini splits, bedroom head is super dirty and is barely moving air. Will need to quote cleaning. Repressed fitting that was leaking for boiler, it appears to have sealed. Instructed customer to call if the pressure drops again and if so we will need to make modifications to boiler set up.
I was arriving because there was an issue with the heat. Upon checking the system. The first thing I noticed was the board was flashing an error code for high limit switch. I increased the fan speed, took out the filter and lowered the gas pressure. This was letting the furnace operate in heat mode without overheating. However, it cannot stay like this for long because it is putting a lot of strain on the blower motor and it is pulling a ton of amps trying to ramp itself up and high speed to get enough air into the system. Because of this, we need to install ductwork on both the supply side and return side of the system. . We will have an install crew come out Tuesday and they will do the work to be done so that we can get over 1200 CFM and get our static under .8.
Arrived to remedy an inoperable system. Upon inspection of the system found that the furnace was in idle mode despite the thermostat sending a call for heat. Performed diagnostic on the thermostat and found it was sending the signal but it was a call for second stage at the thermostat. Switched the wire from the first stage call to the second stage call and the system started as designed. Found that the thermostat block on the furnace needed adjustment to ensure the system will continue to operate according to the thermostats commands. Checked the heat exchanger to ensure system will operate safely. Found excessive rust buildup present on and in the heat exchanger and burner assembly, but nothing that would make the system unsafe to operate. It is just well on its way. Furnace is operational upon departure.
N
N
N
N
Out today to complete proposed work of resetting grade for severe belly in crawlspace. Upon arrival set grade properly, everything should be flowing properly. However, there is still a blockage. We have reason to believe it is still blocked due to line now backing up, then, draining slowly, as opposed to just gurgling which it was doing before. We will return Monday morning to clear drain of any blockage. Cleaned up work area and collected paid with a card. Thank you for choosing LBA services!
TO
Arrived to reset filter sett8 g on thermostat. I showed Kathleen how to reset the settings. Good to go! Thanks for choosing LBA.
Arrived at home and spoke with Daniel about Reece miracle today, which is for a drain line that was bowed and not allowing proper flow. After completing five star, greeting and inspection, we determined that the straps holding the ABS drain line underneath home were done incorrectly and not allowing enough droppage for pipe Quoted to have radio out to adjust pitch, collected signatures, and headed out
Completed sight survey
Qouted and sold
Follow up for rob
DATE: 11/20/24 Detailed description of what was done today: arrived and spoke with Tiana about reason we were called today, what was for a floor drain backing up every time the washer was in use. After completing five star inspection, we determined that there was a miscommunication, there was no floor drain in home and before arrival, Tiana’s father plumbed new piping from the washer, drain to the floor. And that seemed to fix the problem, we ran a few test to make sure I was running properly, and other than that there was nothing else she was when he looked at today. Collected signatures and payment and headed out. Wear and Tear: -NA After reviewing the entire house I went over everything with Tiana to ensure they understood everything going on in the house and what could be done to address it. Services done today: -Inspection Thank you for choosing LBA Services Your technician, Josiah Walker
No recommendations