Independence, MO Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Independence, MO and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Independence, MO.
Recent Jobs and Reviews in Independence, MO
Independence, MO at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Independence, MO in January 2025.
The most recent job was on January 23, 2025.
LBA Air Conditioning, Heating & Plumbing has completed 59 jobs in Independence, MO in the last 12 months. The first job there was in January 2015.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Upon arrival I began the furnace tune up. First, I ran a static pressure test. Your system is rated for a maximum static pressure of .5 and your system is testing at .48. Next, I checked the running amps on the inducer and blower motor and both are amping within specs. They are both amping a little high but still within specs. I took a temperature split as well, specs say between 40 to 70 degrees. Your system is at 125 degrees (-) 76 degrees (=) 49 degree temp rise. The blower wheel is pretty dirty and the capacitor for the blower motor is down to 78% and the specs say it should only go up/down 6% so the capacitor needs replaced. I then tested for CO and got a hit @ 77ppm and then I looked at the heat exchanger and found 2 cracks. Whenever this happens, the EPA requires we shut the gas to the system off and advise you not to run the furnace as it is not safe. My Field Supervisor Jamie with have you sign the “Red Tag” for the system. If you have any questions or concerns please feel fre
Got more information for install project.
Updated estimate
Updated estimate
Planned 4 Star Airflow package for customer to start install on Wednesday.
Duct clean
Sold softener and water line repairs
Inspected main shut off and water lines turned over to supervisor
UV Bulb Replacement
Completed light heat maintenance. Units ran well upon departure.
Out today to reroute kitchen stack to main stack per Cameron. Did so successfully, tested no leaks. Cleaned up work area. Thank you for choosing LBA services!
Upon arrival I began the furnace tune up. First, I ran a static pressure test. This system has a maximum static pressure rating of .5 and the system is testing at .7 which is above the max causing more stress on the furnace. Next, I ran a CO test to ensure the unit was safe to operate and I got a hit on my CO detector multiple times and I found 4 cracks in the heat exchanger that are causing the system to leak carbon monoxide. Homeowner has CO detector in his furnace room but it will only alarm if the CO is detected at 400ppm for 4 to 15 minutes and that is too late to find out it’s leaking. Per EPA Rules & Regulations we are required by law the add a “Red Tag” stating the heat exchanger had failed and we are shutting the furnace down. You may still use the fan or AC if needed. If you have any questions or concerns please feel free to contact us! Your LBA Technician, Tyler R. P.S. No payment was due for todays visit.
L
L
L
L
S
Arrive to customers for a furnace tuneup, and during the process of the inspection, we discovered the furnace, being 27 years of age along with Receiving a high call on static pressure also discovering a dirty blower wheel and a low ohm reading hot surface igniter. All of the components met within factory specs
Completed paperwork and financing application with customer for airflow work. Scheduling work by customer request on 1/24/25
Furnace
Sold
Sold
Sold
Sold
Went for a furnace inspection today. Did a static pressure test, it was at the max. Carbon monoxide is leaking, due to a cracked heat exchanger. The furnace is red tagged. Thank you for choosing LBA services!