Independence, MO Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Independence, MO and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Independence, MO.
Recent Jobs and Reviews in Independence, MO
Independence, MO at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Independence, MO between January 2025 and February 2025.
The most recent job was on February 5, 2025.
LBA Air Conditioning, Heating & Plumbing has completed 59 jobs in Independence, MO in the last 12 months. The first job there was in January 2015.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Completed furnace inspection for customer. All components of furnace tested within manufacturer specifications. Static pressure is elevated, advised customer on how to remedy this without major modifications due to location of equipment and other utilities.
Completed check with customer during furnace tune up.
Unable to get on roof due to weather
.
Upon arrival I began the furnace tune up. First, I ran the static pressure test. This system has a maximum rating of .5 and the unit is testing at .95 which is almost double the max allowed. Next, I took a temperature split on the system. The supply air temp was at 141 degrees (-) return temp was at 76 degrees and the difference between those numbers is 65 degree which is at the very top end of then temp rise allowed. The system did overheat one time while I was working on it. The reason this happened is because the blower wheel is very dirty and the evaporator coil is also rusted and dirty which is making it very difficult for the system to move the amount of airflow it needs. This extra stress has caused the heat exchanger to crack and leak Carbon Monoxide into the home @47ppm(parts per million). Anytime a unit is leaking carbon monoxide we are required by the EPA(Environmental Protection Agency) to add a “Red Tag” to the system and shut the gas to the unit off which I have done and
Arrived for furnace maintenance. Static pressure is failing. Heat exchanger has has rust and hot spots. Blower motor is over amping. Blower wheel is dirty. Inducer motor is running at the max. System is running upon departure. Thanks for choosing LBA.
Went for a furnace inspection today. Did a static pressure test, it failed. Filter got changed. Did a carbon monoxide and gas leak test, no leaks. Combustion analysis test passed. Gas pressure and pressure switch passed. Flame sensor was cleaned. Inducer motor amperage passed. Temperature split between the supply and return duct passed. Blower motor amperage passed and blower wheel is clean. Thank you for choosing LBA services!
Installed smart ac sensors
No answer
Installed new full system
Went for a furnace inspection today. Did a static pressure test, it passed without the filter. The filter is very restrictive causing high static pressure. Did a carbon monoxide and gas leak test, no leaks. Combustion analysis test passed. Inducer motor amperage passed. Gas pressure and pressure switch passed. Temperature split between the supply and return duct passed. Blower motor amperage passed and blower wheel is clean. Thank you for choosing LBA services!
Full standard series system sold for tomorrow. 80% 100k btu furnace and 3 ton 14 seer ac/coil
Furnace is leaking carbon monoxide
Declined
Came out for maintenance static was way beyond manufacture spec have supervisor out now found CO readings as well supervisor looking into the unit further
Re run trunk lines
L
L
L
L
Went for a furnace inspection today. Did a static pressure test, it’s at the max. Did a CFM count, supply side is short causing a restriction. Did a carbon monoxide and gas leak test, no leaks. Combustion analysis test passed. Inducer motor amperage passed. Gas pressure got adjusted to factory specifications. Pressure switch passed. Blower motor amperage passed and blower wheel is clean. Temperature split between the supply and return duct passed. Thank you for choosing LBA services!
Out today to perform work proposed per Camron. Did everything except for main shut off, will be returning tomorrow morning to do so. Tested no leaks on all other work, cleaned up work area and did not collect. Thank you for choosing LBA services!
.
Found crack in hx and CO. Redtagged furnace. Customer shopping my estimate.
Only checked the extended part of the home furnace. Customer declined me checking the main furnace. I had to redtag the furnace I did check due to the carbon monoxide readings I saw. I showed customer and she would like called to have supervisor out to review options from here. I also found that the high limit switch is faulty on the furnace causing furnace to not run continually.