Overland Park, KS HVAC & Plumbing Services

Completed furnace, maintenance and inspection. I checked amp draws and tested components. I cleaned flame sensor and wiped down furnace. Checked out UV system and humidifier. I tested airflow and temp splits. Replaced air filter today for no charge and let customer know that in the future we would have to charge for a filter replacement due to the change in the membership. Furnace is operating within manufacturer specifications.

Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Verified operation of all mechanical and electronic components of the furnace. Checked blower for cleanliness and to see if there is any play in the bearings. Checked systems heat exchanger to ensure proper venting of flue gas. Performed an electronic gas leak search. Furnace is operational at this time.

Customer called in about valve not shutting off all they way. Upon arrival customer explained that she was getting a new fridge and they couldn’t get saddle valve to turn off all the way. Gave customer estimate if we are unable to turn saddle valve off all they way. Customer agreed to pricing if we couldn’t turn off saddle valve all they way. We were able to turn saddle valve off. Did inform customer if it leaks, we will need to move forward with repairs. While checking water pressure noticed outside faucet handle leaking. Water pressure at 60psi. Will send customer estimates for repairs.

Arrived to remedy a system that is making an excessive noise. Upon inspection of the system found that the compressor is making an odd noise. Cut power to the condenser and checked electrical connections. Turn the system back on trying to re-create this noise that the homeowner was hearing. Was never able to re-create the noise, but was able to determine that the compressor is overdrawing amps and the high-pressure side of the system is at extremely high pressure. Search the system for refrigerant restrictions. Determine that the metering device is causing the compressor to overdraw amps and build up pressure on the high side of the system. Coordinating with office to retrieve the necessary part and scheduled repair for Monday.

Arrived for furnace check today. Heat exchanger has rust and is starting to its age. The inducer motor has a leak. The gas chamber is rusting too. I replaced filter today. Temp rise is 62 degrees. System is running upon departure. Thanks for choosing LBA.

Dispatched for furnace tune-up. The components that are tested during the tuneup are heat exchanger, flame sensor, igniter, blower wheel, inducer, temp split and combustion in the heat exchanger. All components of the furnace are with in range of manufacture specifications. Adjusted damper per request and set humidifier to 35% and opened the humidifier damper. Thank you for allowing us in your house to provide the perfect home service and for being a member of the perfect family service club from your LBA Lead Service tech Calvin. If I provided a positive or five star experience. I’d appreciate you sharing your thoughts in a review.

Arrived for furnace check today. Static is running over the max rating. Heat exchanger has water spots but no holes or cracks. Carbon monoxide test was 0 ppm. Blower wheel is dirty. Inducer is running at max rating. Motor bearings are likely wearing down based on what you told me. You are wanting to just let it run as long as it will. System is running upon departure. Thanks for choosing LBA.

Arrived for furnace check today. Static is testing over the max. Heat exchanger looks ok. Carbon monoxide test was 0ppm. There is a 61 degree temp rise. All electrical is running with in specs. The ducts are very dirty and need to be cleaned. We discussed the cleaning and you will reach out soon to set up a time. Thanks for choosing LBA.

Dispatched for furnace tune-up. The components that are tested during the tuneup are heat exchanger, flame sensor, igniter, blower wheel, inducer, temp split and combustion in the heat exchanger. All components of the furnace are with in range of manufacture specifications. Replaced Aprilaire 210 filter and the humidifier pad. Thank you for allowing us in your house to provide the perfect home service and for being a member of the perfect family service club from your LBA Lead Service tech Calvin. If I provided a positive or five star experience. I’d appreciate you sharing your thoughts in a review.

Completed furnace, maintenance and inspection. I cleaned flame sensor and wiped down furnace. I checked all components and amp draws. Humidifier is working well. Furnace is running within manufacturer specifications. Filter needs changed out. Furnace is operational at departure. Water heater is getting pretty old and is starting to show its age. Might be close to time to consider replacing the water heater.

Arrived for furnace check today. Static is passing. Heat exchanger looks good. Carbon monoxide test was 0ppm. There is a 56 degree temp rise. The capacitor has failed and the blower wheel is dirty. All other operations are running properly. With approval I replaced capacitor and cleaned the blower wheel. System is running upon departure. Thanks for choosing LBA.

Arrived for furnace check. Static is passing. Heat exchanger looks good. Carbon monoxide test was 0 ppm. There is a 53 degree temp rise. All electrical components are running in specs. Humidifier is working and set. Thanks for choosing LBA.

Arrived for furnace check today. Static is passing. The heat exchanger has some rust spot that need to be monitored. They aren't holes yet but are close. Carbon monoxide test was 0ppm. All electrical components are running within spec. The solenoid for the humidifier is bad. With approval I replaced that. Humidifier is working properly now. Water is flowing with no leaks. Thanks for choosing LBA.

Arrived for furnace check today. Static pressure is ok. Heat exchanger looks good. Carbon monoxide test was 0ppm. There is a 57 degree temp rise. All electrical components are running with in specs. Ducts are very dirty and need to be cleaned. I presented cleaning and it was declined at this time. System is running upon departure. Thanks for choosing LBA.

Bundled Estimates