Mission Hills, KS Residential HVAC & Plumbing Services
LBA Services was started by people just like you who want and insist on high quality and reliable service. In Mission Hills, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Services has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Mission Hills, KS.
Recent Jobs and Reviews in Mission Hills, KS
Mission Hills, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 19 jobs in Mission Hills, KS between September 2024 and November 2024.
The most recent job was on November 5, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 9 jobs in Mission Hills, KS in the last 12 months. The first job there was in January 2015.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
N
Wasn’t able to speak with husband, asked that I call back tomorrow
Went for a furnace(s) maintenance call today. Started with the downstairs unit. Did a static pressure test, it passed. Changed the filter due to the old one being dirty. When looking at the inside of the duct work, I noticed a severe amount of dirt and debris. Did a carbon monoxide leak test, there was no leaks. Heat exchanger was in ideal condition. Temp split between the supply and return duct passed. Combustion analysis test passed. Inducer amperage and capacitor passed. Checked the gas fittings their was no leaks. Blower wheel was clean and blower motor amperage passed. Went to the upstairs unit. Did a static pressure test, it failed. Changed the filter, due to the old one being dirty. Did a carbon monoxide leak test, there was no leaks. Heat exchanger was In ideal condition. Combustion analysis test passed. Temp split between the supply and return duct passed. Checked the gas fittings, there was no leaks. Inducer amperage passed. Blower wheel was clean and blower motor passed. Tha
2*
Lindsey played a video which showed the system making the reported noise. Tested the system and observed some rattling sounds coming from panels that were slightly loose on the condenser. Added additional screws to secure the panels and made sure every screw opening was occupied. Offered to preventably rebuild the top of the outdoor unit (motor, fan, topper, and capacitor). Lindsey said they would if it happened again. Explained that the fan assembly outside is very delicate and needs to be perfectly balanced to prevent damage to the unit or improper operation. The presence of the stick and the fan rubbing against the side of the shroud caused wear and tear that it was not designed to handle. System produced normal operating sounds (other than the rattling of the loose panels) during the service visit.
N
N
N
N
Completed cleaning of the main floor unit indoor fan assembly. Tested operations in heating and cooling mode. Conducted verification test of the main floor fan motor capacitor and found that it was within tolerance.
Completed furnace maintenance on main system, heat pump maintenance on attic system, and mini split maintenance. On main system I found failing capacitor and blower wheel/motor covered in dirt. Static improvement has helped system a lot. Filter will need changed soon. Attic system looks great however heat pump outdoors has a capacitor almost out of range. It also had the condensing fan motor blades hitting the plastic walling. I was able to correct that for now. Talked with customers about findings and showed pictures. Customer approved blower wheel cleaning and blower capacitor replacement. Will need to return first call Wednesday morning to complete work. Systems are operating at departure.
Replaced blower motor under warranty after it had failed. System operating normally upon departure.
Arrived for system outage. Upon diagnosis I found the blower motor for the furnace is bad. I ordered the part, won’t be in until next week. Will call to schedule a come back time when it’s arrives. Thanks for choosing LBA.
Left message
Left message
Left message
Left message
Air Filter Replacement and HVAC System Maintenance: The homeowner requested an autumn maintenance checkup for their HVAC system. I found the air filter clogged with debris from heavy summer use. After replacing the filter and performing a system check, the HVAC unit was ready to handle the fluctuating temperatures of the fall season.
Customer called stating upstairs system was not cooling. After looking at furnace, it was found there was a low voltage short in the AC circuit. Verified the low voltage from thermostat was good, checked outdoor unit and found signal wire chewed through and grounded to case. Stripped wire and reconnected, system energized and began cooling. Monitored system and it’s operating normally at this time.