Mission Hills, KS Residential HVAC & Plumbing Services
LBA Services was started by people just like you who want and insist on high quality and reliable service. In Mission Hills, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Services has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Mission Hills, KS.
Recent Jobs and Reviews in Mission Hills, KS
Mission Hills, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Mission Hills, KS between November 2024 and December 2024.
The 3 customer reviews shown here average 5.0 out of 5.
The most recent job was on December 4, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 9 jobs in Mission Hills, KS in the last 12 months. The first job there was in January 2015.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Upon arrival the homeowner explained that he’s had an ongoing issue with his Lennox AC/Heat Pump making very loud noises. I had the homeowner turn the AC on while I checked things out. I was unable to recreate the loud noise. I then had him switch over to Heat Pump mode and I checked for any noises with the homeowner outside with me. We were unable to recreate that noise but he had a recording on his phone of how loud it gets and it’s very loud. I advised him to try and take another video next time it happens and to call us immediately so we can get back out here and lock in a solution. If you have any questions or concerns please feel free to call us! Your LBA Technician, Tyler Rickard P.S. No payment was due for todays visit. Have a great rest of the week!
Gas company notified customer of improper flue and advised sealing chimney penetration, I was able to stretch flue to seat in chimney but was unable to seal it during visit, will need return visit to complete repairs.
Air Conditioner Repair Service: Resolved frequent AC unit circuit breaker trips by diagnosing a faulty compressor. Replaced the component to restore cooling efficiency and ensure consistent operation.
L
L
L
L
Did maintenances on three furnaces today. Started with the upstairs system. Did a static pressure test, it failed. Did a carbon monoxide leak test, there was no leak. After inspecting the heat exchanger, I noticed severe rust, but no cracks. Combustion analysis test passed. Tested for gas leaks there is no leaks. Gas pressure met factory specifications. Pressure switch passed. Temp split between the supply and return duct passed. Inducer motor amperage passed. Blower wheel is clean and blower motor amperage passed. Filter got changed. Next I did the main furnace. Did a static pressure test, it failed. Did a carbon monoxide leak test, there was no leak. Heat exchanger is In ideal condition. Combustion analysis test passed. Tested for gas leaks there is no leaks. Gas pressure met factory specifications. Pressure switch passed. Temp split between the supply and return duct passed. Inducer motor amperage passed. Blower wheel is clean and blower motor amperage passed. Filter got changed.
Increase the size of the boot, and the return to the transition. Install the register backside of platinum alleviate pressure.
L
L
L
L
Went for a service call today. Diagnosed a bad pressure switch and a bad control board. Thank you for choosing LBA services!
K
K
K
K
Customer declined water quality inspection and had water heater operating again before we arrived.
Completed 4 system maintenance and inspection. I cleaned up furnaces and flame sensors. I checked all components and amp draws. I tested airflow and temp splits. Airflow pressure on both upstairs systems are failed. I tested carbon monoxide on 3rd floor furnace. After inspection heat exchanger I found where heat exchanger is leaking the carbon monoxide into the home. The exhaust is rusting through and the 3rd floor furnace does not have a designated gas shut off. Exhaust is improperly ran as well. Main floor systems are running within manufacture specifications but do have dust building up on the blower wheels. Talked with customer about systems and they would like some time to decide what to do.
Service charge
Upon arrival I began the furnace tune ups. This house has a total of 4 systems. I worked on 2 of the furnaces todays using their current membership to cover the cost. I checked the static pressure on both systems. They are both rated for a maximum static pressure of .5. Both systems were testing at the same reading of .68. I turned both of the blower speed taps in heating mode down 1 tap and that brought the static pressure down to .62. I checked the running amps on the inducer and blower motor on both systems and everything was within manufacturer specifications. These systems have a temperature rise rating that should be between 40 & 70 degrees. The main floor unit was testing at 50 degrees and the 2nd floor unit was reading at 45 degrees. I didn’t find any cracks in the Heat Exchangers at this time. I also did a CO test and found Zero PPM(parts per million). Both units had a Zero reading. I thought i smelled some natural gas so I tested each joint on the gas lines but found no leaks
N
N
N
We had LBA replace both HVACs at our house 2 years ago and one of the A-Coils developed a leak. LBA promptly came out and tried to repair it twice and ended up having to replace it. Obviously LBA received a defective part but they immediately took care of the problem. Thank you Vern, Josh and Kevin.
Thank you Eric! You did a thorough job on maintenance of our AC heat pump and coil. Glad to hear our unit will be working more efficiently.
We have been using LBA for many years and have been very happy with the service. We have Rusty come to work on our systems every time and we could not be happier. He is always thorough, helpful and friendly.