Kansas City, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Kansas City, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Kansas City, KS.
Recent Jobs and Reviews in Kansas City, KS
Kansas City, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Kansas City, KS in January 2025.
The most recent job was on January 15, 2025.
LBA Air Conditioning, Heating & Plumbing has completed 131 jobs in Kansas City, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Homeowner is at work and won’t be off until late, called and sent text about 30+ year old Lennox that is leaking c/o. Waiting on a text back now
Arrived to do a performance maintenance. Started inspection with the furnace in the basement. Set up for combustion analysis temperature split and static pressure and carbon monoxide tests. Found that the basement system is operating with failing static pressure. When doing this test on the upstairs furnace found dangerous levels of carbon monoxide in the air stream. Reached out to a field supervisor to finish the diagnosis on the basement systems static pressure and verify my carbon monoxide readings. Verified operation of all mechanical and electronic components of the furnace. Found that the basement systems fan is slow to start and is drawing more power than it should, but still within specifications. It also appears that the motor for the fan has lost the grease to its bearings. Checked blowers for cleanliness and to see if there is any play in the bearings. Found that the fan in each system is coated in dust debris. Checked systems heat exchanger to ensure proper venting of flue
Upon arrival, customer was having intermittent furnace issues. I tested system and found that it was getting hot and the gas valve was intermittently movie and the system was overheating. System was 20 years old and had major thermal stress on heat exchanger. Customer decided to have furnace and AC replaced. I seen that the expansion tank on the water heater was resting and leaking so I recommended getting that fixed before turned into a bigger leak or potentially flooding the basement customer requested that I take a look at the water heater and see if it would be better to replace it. I found that it was 12 years old and had a couple small deep spots so customer decided to replace it. Spoke with manager to see if we could get a discount on getting the full system installed and agreed to give a 20% discount if it is done to fill our spot tomorrow Customer agreed to have that done and also have a humidifier installed. Tried to contact customer son to go over everything but he was unava
X
Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Found that the system is operating with failing static pressure. Reached out to a field supervisor to finish the diagnosis on the systems static pressure. They are tied up at this time, but set a time for them to finish the diagnosis on Thursday morning. Verified operation of all mechanical and electronic components of the furnace. Found that the blower motor is drawing its maximum rated amps. This only happens when the motor is close to failure. Checked blower for cleanliness and to see if there is any play in the bearings. Found that the blower wheel is heavily coated in dust debris. Checked systems heat exchanger to ensure proper venting of flue gas. Found hot spots indicating that the system is operating with poor airflow. Furnace is operational at this time.
A
Preformed plumbing inspection, showed findings to customer, turned over to supervisor
Installed new expansion tank, Air separator,and fill valve
Call not run. Advised cycling power. Still no heat. Will schedule first call.
Came out here for a furnace tuneup. Upon arrival tested static static was passing. No carbon monoxide within the ductwork. Nothing was wrong with the unit. Replaced filter cleaned out flame sensor. Make sure that the unit was running perfectly fine. Did notice that the blower wheel was dirty customer decided to hold off on getting that cleaned. Besides that everything else is looking pretty good on the unit. Thank you for choosing LBA services. - Ramon
Estimate
Bad control board
Installed new 95% 70k BTU Furnace, Model FR951V0703A17M4SCA 2 Year Labor Warranty 10 Year Parts Warranty Limited Lifetime Heat Exchanger Warranty
Arrived to customers for a furnace tuneup in during the process of the inspection. We received a high call on static pressure along with discovering a dirty blower wheel and biological growth at the Condensation drain pan. All other components met within factory specs. PSF Membership/Smart AC
Declined financing
Went for a warranty call. When going to humidifier water line need to be adjusted.
Units were working upon arrival spoke with Jessica and me and her both went and checked units and she confirmed that they are working
.
Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Found that the system is operating with failing static pressure and is on the verge of overheating. Reached out to a field supervisor to finish the diagnosis on the systems static pressure. Verified operation of all mechanical and electronic components of the furnace. Checked blower for cleanliness and to see if there is any play in the bearings. Checked systems heat exchanger to ensure proper venting of flue gas. Found hot spots indicating that the system is operating too hot. Spoke with homeowner about the system. Replaced the humidifier panel and installed the smart ac sensors. Furnace is operational at this time.
L
L
L
L
Called both phone numbers on file and knocked/rang doorbell. With no answer. Found bad gas valve. Replaced and furnace ran as it should.
Sold