Kansas City, KS HVAC & Plumbing Services

Went over multiple options of duct cleaning and air purification. She’s wanting to spend less money and get the same result

Customer wasn't sure if gas line was preventing stove from sitting back but it was his plug in for the stove preventing such, we told him we could still quote him on one, but that's not the issue, we also mentioned he could tweak his oven a little so he can open his dishwasher which he did. No issues here

Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Verified operation of all mechanical and electronic components of the furnace. Checked blower for cleanliness and to see if there is any play in the bearings. Found that the fan is beginning to collect dust debris. Checked systems heat exchanger to ensure proper venting of flue gas. Verified operation of the humidifier. With homeowners approval replaced the humidifier panel. Furnace and humidifier are operational at this time.

This charge will be for up to 10 feet spot repair but will do an additional 5 feet for getting past the tree to prevent future growth of roots. Customer will get a 2 year warranty on parts and labor the total depth exceeds 8.5 feet down. arrived at the property and identified a blockage in the main sewer line. The homeowner has occupied the residence for approximately one year and reported ongoing sewer issues during that period. A sewer camera inspection was performed. A complete stoppage was located approximately 32 feet from the structure, affecting an estimated 10-foot section of pipe. The inspection revealed that the sewer line at this location was broken and offset, causing toilet paper and waste to accumulate and resulting in the blockage. The existing pipe at the failed section was identified as clay. Additional inspection of the sewer line identified a minor belly over an approximate 10-foot section; however, water was flowing through this area at the time of inspection. The

Completed a comprehensive furnace tune-up to ensure safe, efficient, and reliable operation for the home. Work performed included: System Inspection & Safety Checks • Inspected heat exchanger for cracks, corrosion, and proper flame pattern. • Verified operation of all safety controls, including high-limit switch, rollout switch, pressure switch, and Completed a comprehensive furnace tune-up to ensure safe, efficient, and reliable operation for the home. Work performed included: System Inspection & Safety Checks • Inspected heat exchanger for cracks, corrosion, and proper flame pattern. • Verified operation of all safety controls, including high-limit switch, rollout switch, pressure switch, and flame sensor circuitry. • Checked venting system for proper draft, secure connections, and obstruction-free flue path. • Tested carbon monoxide levels at the supply, return, and flue to ensure safe operation. Burner & Combustion System • Cleaned burner assembly and verified prope

…

Follow up completed with customer

Dispatched for heat not keeping up. Faulty loose wire. System is working properly at departure

Customer has a broken clay pipe outside at 35 feet as well as a blockage at 35 feet was able to push past and see some offsets further down. Will repair up to 15 feet for homeowner will be replaced with strong back as well as 15 feet of plastic pipe will do everything too cold. The customer’s depth of sewer pipe exceeds over 8 feet will need to excavate as well as bench back to ensure safety.

Customer called in needing water line fixed. She has a couple of lines in her garage that bursted. Traced water lines and found water lines to be located above finished ceiling. Informed customer that we would need to cut into ceiling and also made customer aware we don’t put back sheet rock. Customer understood. Gave pricing and customer opted to get work done. Went ahead and cut ceiling and found water line. Cut out galvanized water line and installed a cap. Turned water back on for home. Checked for leaks and no leaks detected. Recommended customer to keep area cut open during the winter since I felt cold drift in cavity and want to prevent lines from freezing. Also gave estimate to install new shower valve and will have the office call customer to schedule a removal of furnace system.

Arrived for system not keeping up. We will be back tomorrow morning. Thanks for choosing LBA.

This task will be digging a 2 by 2 ft section of pipe of concrete to gain access to water line to see if the leak is nearby. If the leak is nearby we can do a repair on the water line as this will be a bandaid to the service line. This task will come with a 1 year warranty.

Went for a heating call. Inducer is making the noises when starting up and is close to max rating. Customer approved to have replaced. Did a combustion test system is within range. Inspected heat exchanger does have a lot of heat stress and showed customer. Temp split is passing for system. Did clean flame sensor and pressure switch hose. System is up and running before leaving. Thank you for choosing LBA services-Johann

Customer called in about kitchen sink not draining. Customer had a company come out couple of days ago. Checked underneath sink and customer drain outlet is higher than the tubular is and causing water to hold in the disposal. Ran water for a minute and water started backing up. There is a clean out in basement. Educated customer about the drain being higher than the tubular trap and gave options. Customer wants to think over options.

Arrived to remedy an inoperable system. Upon inspection of the system found it stuck trying to verify ignition. Checked the flame sensor and found it heavily corroded. Replaced the flame sensor. Checked the systems gas pressure to ensure this won’t happen again. Found that the furnace was supplying too much gas to the burners because the furnace is receiving too much gas pressure. Made the necessary adjustments to the furnaces gas system. Verified that the changes made will allow the system to operate properly. Furnace is functioning properly at this time.

Duct cleaning and UV LIGHT

Arrived to do a performance maintenance. Upon inspection of the furnace found that the furnace exhaust pipe is leaking condensation into the basement. Found that the furnace is operating with the wrong size filter. System needs a 20X25X4 filter. Recommend a filtration rating of MERV 8. Set up for combustion analysis temperature split and static pressure tests. Verified operation of all mechanical and electronic components of the furnace. Checked blower for cleanliness and to see if there is any play in the bearings. Checked systems heat exchanger to ensure proper venting of flue gas. Found large hotspots on the heat exchanger where it has overheated at some point. Verified operation of the humidifier. Furnace and humidifier are operational at this time.

Completed furnace, maintenance and inspection. I cleaned flame sensor and wiped down furnace. I tested components and amp draws. I checked airflow pressure and temp splits. No issues with the furnace at this time. I talked with customer about the duck cleaning with UV special. Customer would like to talk with spouse to see when they would like to get that scheduled. Furnace is operating within manufacture specifications at departure.

Customer called home warranty and the Hx is 100% covered by them. They are having a tech come out at 1pm this afternoon. I explained the cons and to make sure whoever comes out is a licensed professional, and if not. To call us back

Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Found that the system is operating with excessive static pressure. Verified operation of all mechanical and electronic components of the furnace. Checked blower for cleanliness and to see if there is any play in the bearings. Found that the fan is coated in dust. Checked systems heat exchanger to ensure proper venting of flue gas. Found that the heat exchanger is damaged, making the furnace unsafe to operate. Verified operation of the humidifier. Turned the gas off to the furnace due to it being unsafe to heat the home.

Customer called in about kitchen drain backing up. Gave pricing to augur kitchen drain and custimee accepted. Kitchen drain is going to outside of the home and ties back into septic tank. Augured kitchen drain line. Cable did get stuck at two points. Once approx 5ft in and again at approx 25ft out. Did get cable unstuck. Ran water and water stared draining again.

Arrived to remedy a system that is making excessive noise. Upon inspection of the system, the furnace was running and heard the excessive noise coming from the furnace. Determined this noise is coming from the inducer motor. Pulled inducer from the furnace and tried tightening all the screws that mount the motor to the fan and the assembly to the furnace itself. Tested system operations and found that the noise is still present if not worse. With the recent repair on the system, today’s repair should be covered under a full warranty. Called and ordered inducer motor. Informed homeowner of the situation and let her know that I was leaving to go get the new inducer motor. Returned with the new inducer motor and installed it in the system. Tested system operations. System is functioning properly at this time.

Dispatched to perform a routine furnace tune-up. A full system inspection and operational check were completed to ensure the furnace is operating safely, efficiently, and within manufacturer specifications. During the inspection, it was recommended to complete a duct cleaning and blower wheel cleaning, along with upgrading to a polarized media filter, to improve overall system performance and indoor air quality. Benefits of Recommendations: • Duct Cleaning: Over time, dust, debris, pet dander, and other contaminants accumulate inside the ductwork. Cleaning the ducts improves indoor air quality, reduces airborne allergens, and allows the system to deliver air more efficiently throughout the home. • Blower Wheel Cleaning: The blower wheel is critical for proper airflow. Buildup on the wheel restricts airflow, causing the furnace to work harder. Cleaning the blower wheel improves airflow, efficiency, comfort, and helps extend the life of the system. • Polarized Media Fi

Arrived to remedy a system that’s not consistently heating. Upon arrival found the thermostat set to 70 and it was reading 65 in the home. Checked the furnace and did not find any fault codes. Reset the call for heat at the thermostat and found that the furnace would try to heat. System fired up like normal. Continued diagnostic on the system and found that the pressure switch is intermittently dropping signal. Spoke with homeowner about the repair. With homeowners approval ordered a new pressure switch. Retrieved the new switch and performed the replacement. Tested system operations to verify consistent heat and signal from the pressure switch. Furnace is functioning properly at this time.

Customer called to follow up on duct cleaning estimate - she would like to move forward and book for 1/12/26.