Prairie Village, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Prairie Village, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Prairie Village, KS.
Recent Jobs and Reviews in Prairie Village, KS
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction with the service provided. Customers consistently express appreciation for the professionalism, efficiency, and expertise demonstrated by the technicians. Recurring themes include prompt and timely service, with many reviewers highlighting how quickly issues were diagnosed and resolved. The technicians are frequently praised for being friendly, courteous, and communicative, taking the time to thoroughly explain problems and solutions in clear, understandable terms. Many customers specifically mention feeling confident that they were not being upsold unnecessary services, which they found refreshing and trustworthy. The quality of workmanship receives high marks, with reviewers noting thorough inspections, attention to detail, and jobs completed efficiently—often within hours. Several customers express gratitude for cost-effective solutions and fair pricing, with some noting significant savings compared to other estimates. The membership and maintenance programs are highlighted as providing excellent value and peace of mind. Overall, the tone is enthusiastic and appreciative, with many reviewers stating they would highly recommend the service to others and plan to use the company again in the future. The sentiment reflects a customer base that feels well-served, respected, and confident in the technical abilities and integrity of the service providers.
Prairie Village, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Prairie Village, KS between September 2024 and October 2024.
The most recent job was on October 2, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 53 jobs in Prairie Village, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
92%, 100k btu furnace install for 10/3/24
Went for a furnace maintenance call today. Did a static pressure test, it passed. When checking for carbon monoxide with my meter, it showed that the furnace was leaking carbon monoxide. When checking the heat exchanger, I found rust and a crack in it. The gas to the furnace is shut off and the unit is red tagged. Thank you for choosing LBA services!
Estimate
Follow up
Presented quote for drain repipe. Customer will look over estimate and get back with us.
No answer
Sold both furnaces
Completed furnace inspection for customer. On main floor system it was found that it had abnormally high carbon monoxide readings in the fresh air supply. Inducer motor was running much higher amperage than rated and visibly had leaking inducer, collector seal. Second unit in comparable conditions but not as severe. Turned over to field supervisor for further advisement. Customer opted to replace furnaces.
Na
Airflow decline
Went for a maintenance call today. Did my static pressure test. System rated .8. System operating at 1.0 failing for manufacture specifications. Had a supervisor come out for second test. Did my CO detection for furnace. Meter did detect CO. As well for supervisor red tagged system. Customer signed red tag acknowledging there is CO within the heat exchanger. As well as we did shut off the gas line going into the furnace. Did a heat exchanger inspection. Found one of the seals was from the heat exchanger broken from the seal. Showed customer when inspecting. No further test due to concerns for system. Did leave a spare filter for customer to have. Supervisor will collect signatures and have estimates for solutions to resolve the issue. Thank you for choosing LBA services.
Came out here for a furnace tuneup. Upon arrival I tested static pressure static was passing as well as CFM took a look at the rest of the unit the blow it was good as well as the amps on the motor amps on the inducer. We’re good as well. I cleaned out the flame sensor for her HSI ohms were good as well. Make sure all the connections were tight, set everything back together and left the unit running. Thank you for choosing LBA services.
Completed furnace maintenance and inspection. I checked all components and amp draws. When I arrived I turned thermostat on heat however furnace did not turn on like it was supposed to. After seeing that the inducer motor was not running I pulled the motor out of the furnace to inspect it. I found inducer rotors stuck. I ran a camera to inspect heat exchanger and found mold inside system. I showed customer findings and with approval I replaced inducer motor under part warranty and I installed a UV light to fight mold growth. After parts were installed I turned system on to make sure system ran as it should. All operations were within manufacture specifications at departure. I talked with customer about water leaking in home and water heater leaking at the pressure relief valve. I with customer approval I contacted office so they can send plumbing out to home to look at everything and see what’s goes on. Office will contact customer to schedule visit. Air filter needs replaced today
Installed capacitor that was included with duct cleaning. Turned system on and all ops are okay at departure.
Sent estimate on 40 ft burst and saddle for main
Upon arrival I began the furnace tune up. I started by doing a static pressure test. Your system is rated for 1.0 max and it is reading at .8 which is 80% of the max, perfect. Next, I did an inspection on the heat exchanger and the evaporator coil. Both looked good at this time. I checked for any CO leaks but found Zero. Replaced both filter for his electromagnetic filters 20x25x1. The flame sensor had failed and the homeowner opted to have that replaced today. We also noticed the furnace didn’t have any surge protection on it. We discussed and decided it would be best to get on installed today as well. All the electrical components were within manufacturer specifications. The blower and inducer motor were both reading within specs. We had a temperature rise(aka delta T) at 42 degrees which is also within specs for your system. Installed new flame sensor and surge protector to the furnace. Lastly, I installed the SmartAC sensors in their home. They purchased the SmartAC plan back in th
Estimates left for jetting service. Camera inspection showed loaded line as well as break in line.
Jetting ml
Cap in clean out mot adjusted right. Change for a new one from home depot
Sprinkler pipe broken. Shut off valve so they can have water for now
Replaced kitchen stove gas line roughly 40’. No more leaks at this time.
.
Na
Customer called stating main floor system was struggling to maintain temperature. Upon initial inspection it was found that system was running but suction line was not nearly as cool as it should be and discharge was very hot. While feeling lines I could feel compressor stop. Came outside to condenser and found compressor and fan had both tripped on thermal limit. Condenser coil was plugged up, washed coil and reinstalled top of unit and it was running again with the fan. Advised customer to check condenser and rinse periodically if they notice excess of dirt or debris.
Will be coming out Friday to fully inspect crawl space after gas company does another inspection ince said that he spoke to the customer who had the gas company come out and leak detected and found that the leak is under the house. After investigating the crawl space he found that there is an old furnace and AC unit. The issue appears to be further into the crawl space that he isn't able to reach. While he was under the house, he found a raccoons nest with a live raccoon in it, he did not proceed further. We will need to schedule a time when Vince has a helper as this will likely be at least a half day job with another person. Created a loose estimate for the gas line replacement of 10-20 feet. I let Vince know our soonest would be Friday to come and assess fully the rest of the crawl space if the customer is interested. Matt or I will be receiving a call afterwards to finalize the plan. Richard is interested in us replacing the gas line and would like Vince to come back out with a h