Olathe, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Olathe, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Olathe, KS.
Recent Jobs and Reviews in Olathe, KS
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction with the service provided. Customers consistently express appreciation for the professionalism, efficiency, and expertise demonstrated by the technicians. Recurring themes include prompt and timely service, with many reviewers highlighting how quickly issues were diagnosed and resolved. The technicians are frequently praised for being friendly, courteous, and communicative, taking the time to thoroughly explain problems and solutions in clear, understandable terms. Many customers specifically mention feeling confident that they were not being upsold unnecessary services, which they found refreshing and trustworthy. The quality of workmanship receives high marks, with reviewers noting thorough inspections, attention to detail, and jobs completed efficiently—often within hours. Several customers express gratitude for cost-effective solutions and fair pricing, with some noting significant savings compared to other estimates. The membership and maintenance programs are highlighted as providing excellent value and peace of mind. Overall, the tone is enthusiastic and appreciative, with many reviewers stating they would highly recommend the service to others and plan to use the company again in the future. The sentiment reflects a customer base that feels well-served, respected, and confident in the technical abilities and integrity of the service providers.
Olathe, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Olathe, KS in October 2025.
The 25 customer reviews shown here average 4.8 out of 5.
The most recent job was on October 29, 2025.
LBA Air Conditioning, Heating & Plumbing has completed 154 jobs in Olathe, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Gave estimates for all 3 different replacement options . Will follow up as Steven has 2 other quotes
Performed Seasonal maintenance. Unit is in good working order
Removed bad joint. Replaced with new joint and line. Triple evacuation and fired off system. Need to check charge in the spring on a dry warm day.
Went for a maintenance call today for heat. Tested for static pressure system is failing when in heat. All electrical components are passing for manufacture specifications. Did a combustion test is within range. Inspected heat exchanger no cracks/leaks were detected. Checked temp split and is passing. Did replace filter for customer. Cleaned flame sensor and pressure switch hose. Did notice blower wheel is collecting dust reason for it filter hasn’t been replaced in months.System is up and running before departure. Thank you for choosing LBA services-Johann
Collect info for replacement of a mini split and sent info to rick
Quote to replace the heat exchanger in the Lennox package unit serial 5615M07508 marked as #3. The heat exchanger was found rusted through at the seams during the recent preventive maintenance. This unit's heating mode has been disabled for safety and to prevent carbon monoxide from entering the conditioned space until repairs can be made. The existing heat exchanger is under factory warranty until December 2025. The customer is responsible for the labor and hoisting of the exchanger to the roof. Price includes labor and crane rental. Repairs warrantied for one year parts and labor.
Completed furnace maintenance and inspection. I checked all components and amp draws. I tested airflow and temp splits. I tested for carbon monoxide and inspected heat exchanger. I cleaned flame center and wiped down furnace. When testing the hot surface igniter I got a reading that was far above manufacturer specifications. The extra resistance in the hot surface igniter causes the igniter to become too hot, which can cause the hot surface igniter to crack and then not work. The carbon monoxide test showed parts per million coming from the furnace. I inspected the heat exchanger inside and out and did not find any cracks or holes at this time. However, I did find the sections of the heat exchanger that are held together are separating apart. I showed customer live footage and pictures and explained what causes that and how that can affect them. When I arrived the temp splits on the furnace were sitting between 75- 80° difference when it should be between 35-65° difference. I adjuste
Quote to replace the heat exchanger in the Lennox package unit serial 5615M04576 marked as #2. The heat exchanger was found rusted through at the seams during the recent preventive maintenance. This unit's heating mode has been disabled for safety and to prevent carbon monoxide from entering the conditioned space until repairs can be made. The existing heat exchanger is under factory warranty until December 2025. The customer is responsible for the labor and hoisting of the exchanger to the roof. Price includes labor and crane rental. Repairs warrantied for one year parts and labor.
*)*)&&)&)&))&)&)&&)&)*(*(*(*(*((&(*(* Shop minimum &(&)*)*;*)*)*)*)*)*)*)*:*))*)*)*)*:*: Arrived and spoke with Grant (on-site). He relayed to me that KU had a tech arrive and resolve the problem in the one furnace that was not functioning in heat mode. The other furnace that was reported as not working is functioning and all hvac systems are functioning on heat mode as per Grant. Service was declined while on-site and Michelle was notified of such. Thank you Jon
Today a failed ignition control board was diagnosed. After the replacement of the board the flames were observed to be lifting. The burners were removed and brushed clean. The system has returned to normal function after today’s work. Thank you, Jon Tech notes: Rtu #1 Lennox M/N KGA048S4DH3G S/N 5615M07668 Not holding flame F.S. Wire (0 Ohms) UAdc=0 with a known good f.s. Heat board output voltage 110-85vac
For this job it’ll require to access cuts under sink. One in wall and one at bottom of cabinet as well. San tee goes down then 90s thru floor joist and at very least a ft of repipe will be needed after that
10/24/25 - Completed a heating maintenance on two unit heaters. The heat exchangers were checked and proper operation was tested. The unit ending in 1979 was currently not functioning at this time, it tries to ignite, then shuts off right after. The unit then shuts off after three failed ignition attempts, the unit will need to be diagnosed further to determine the issue. The other unit heater was running well at this time, and there were no further issues found. The RTU’s will still need to be checked, but on a different day due to the rain.
Evaluation completed supervisor will send estimates to customer.
Full system
Full system install scheduled for October 24. Collecting remainder via check tomorrow during install.
Performed furnace, maintenance and inspection. After inspecting the furnace, I did not find any carbon monoxide leakage however, customer would like to look at replacement due to age.
Arrive for furnace check today. Static is passing. Heat exchanger looks good. Carbon monoxide test was 0 ppm. Blower wheel is clean. All electrical is running in spec. There is a 50 degree temp rise. Humidifier is working. System is running upon departure. Thanks for choosing LBA.
10/22/25 - Completed a full heating maintenance on all equipment. The filter was changed in the air handler in the back of the warehouse, and it was running well at this time. The filters were changed in all RTU’s and proper operation was tested. First, RTU 1 was not heating at this time, the flames would come on, and then shut right back off, the unit would then shut off from failed ignition. All components were checked, but the unit will need to be diagnosed further to determine the issue. Then, both RTU’s 2 and 3 have cracked heat exchangers. The units both ran well when tested for proper operation. The gas has now been shut off to both units, W1 and W2 has been disconnected, and the gas valve was turned off. Lastly, both units will not be heating until the heat exchangers are replaced.
Went for a maintenance call today. Tested for static pressure, system is passing when in heat. Did a combustion test is within range. Inspected heat exchanger, no cracks or leaks were detected. Did find rust spots and heat stress marks. Did show customer findings as well inducer motor is leaking. Amperage is running close to max for inducer motor. Amperage for blower is passing. Cleaned flame sensor and pressure switch hose. Temp split is passing for system. Did noticed blower wheel has dust built up will recommend a cleaning. System is up and running before leaving. Thank you for choosing LBA services-Johann
——-
Washer stand
Clean
Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Found that the system is operating with failing static pressure. Verified operation of all mechanical and electronic components of the furnace. Found that the capacitor for the furnace fan is failing. Checked blower for cleanliness and to see if there is any play in the bearings. Found that the blower wheel is heavily coated in dust debris. Checked systems heat exchanger to ensure proper venting of flue gas. Performed an electronic gas leak search. With homeowners approval replaced thermostat failing capacitor. Furnace is operational at this time.
Full system and duct cleaning sold 16 seer 3 ton 2 stage ac and 80k btu 96% furnace 12x24x1 return drop Eco bee thermostat
Arrived for furnace check today. System is from 2005. Static pressure is running over the max rating. Heat exchanger has rust and hot spots. Heat exchanger tubes are showing separation. The coil is rusting out. Inducer is over amping. Blower motor is over amping. Blower wheel is dirty. The temp rise is close to the max. My field supervisor Dre is on his way out to discuss best solutions. Thanks for choosing LBA.
Excellent Service and able to answer all our questions!
At this time I’m very disappointed with the outcome of todays service findings. Based on what I’m been informed a 3 year old s system is not operating due to a duck work issue that should have been addressed during installation. Now I’m expected to shell out another $3400 on top of what I’ve already spent on a new system for my house. Until this is addressed I will continue to give LBA a poor rating. Please advise as to next steps. Thanks, Jim
Jonathan was polite and professional, a d we couldn’t have asked for better. However, the person who arranged the service call (Noah), not so great. He had communicated a 9-12 time slot when I arranged the appt, but then on appt day told me he had me down for 12-4. I had meetings planned for Monday afternoon thst I had to excuse myself from. More importantly though, Noah (the appointment scheduler) never told me there was a $120 service charge just to get an estimate. So I was surprised when I had to pay. Just to reiterate: Jonathan, the tech who came to my house was great. Noah, the appt scheduler, not so much.
Had such a good experience with LBA and Robert, my technician.
Jake arrived on the designated time and provided outstanding attention to the task at hand. He was thorough and courteous with little distraction from his work. He displayed a tremendous focus to completing the task at hand. He was attentive to questions & informative in answering any questions we had.
Excellent service
Good
LBA was at our residence within 1.5 hrs from our call on the weekend. We had a water backup and the problem was solved.
Great Quality person in Omar!
In and out, very good!!!
Nick called and confirmed our appointment as expexted. The tech showed up right on time. Daniel and Danny were great. Daniel was super informative about what all was going on with out system and allowed for us to make a more educated decision on upgrading our central heating and air unit with Danny providing expertise on the right decision. Great team!
Clint provided some good information on plumbing fixes I should consider
Robert did a great job you’re lucky to have him.
Nick was fantastic in all aspects of the explanation, installation and ensuring that everything was properly done. Highly recommend!!
Though and to the point. Good communication
LBA Plumbing Inspection
Kaden was very pleasant to work with, answered all my questions, and the estimate for a new 40 gallon water heater replacement, install and old tank haul away was very reasonable. This is the third time we have had LBA out to our house and we have always been very pleased with their technicians and services. I highly recommend their services to anyone.
Andrew arrived at the designated time & presented himself by letting us know that we were past LBA customers. After an assessment of our plumbing concerns Andrew developed a plan of repair & cost estimations (with options) & an approximation of the time length of the repair.
Great service , everything was explained before he started and after he was finished .
Robert came out on Christmas Eve and fixed our furnace. Thank you
Great service
got here on time and everything was all good. excellent work.
Nick did a great job inspecting our furnace/central air system. He invited me to watch what he did and explained what he was doing. He was very thorough and informative. He did a great job and I would recommend LBA to anyone looking for central air service.
Patrick K was polite and informative. We were his last customer for the day. We are grateful that he treated us like the first customer of his day. Plus, we got same day service. Thank you, LBA, for such great service!
Great service