Olathe, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Olathe, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Olathe, KS.
Recent Jobs and Reviews in Olathe, KS
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction with the service provided. Customers consistently express appreciation for the professionalism, efficiency, and expertise demonstrated by the technicians. Recurring themes include prompt and timely service, with many reviewers highlighting how quickly issues were diagnosed and resolved. The technicians are frequently praised for being friendly, courteous, and communicative, taking the time to thoroughly explain problems and solutions in clear, understandable terms. Many customers specifically mention feeling confident that they were not being upsold unnecessary services, which they found refreshing and trustworthy. The quality of workmanship receives high marks, with reviewers noting thorough inspections, attention to detail, and jobs completed efficiently—often within hours. Several customers express gratitude for cost-effective solutions and fair pricing, with some noting significant savings compared to other estimates. The membership and maintenance programs are highlighted as providing excellent value and peace of mind. Overall, the tone is enthusiastic and appreciative, with many reviewers stating they would highly recommend the service to others and plan to use the company again in the future. The sentiment reflects a customer base that feels well-served, respected, and confident in the technical abilities and integrity of the service providers.
Olathe, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Olathe, KS in September 2024.
The most recent job was on September 27, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 149 jobs in Olathe, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Went for a HVAC maintenance today. Did a static pressure test on the unit, it passed. Blower wheel was dirty. The amperage for the blower motor passed. When checking for Carbon Monoxide leaks, my meter detected a leak. So i red tagged the furnace and shut the gas off to it. When looking at the heat exchanger, I noticed a severe amount of rust. Inducer motor capacitor, passed factory specifications. The pressure switches passed as well. Temp split between the supply and return duct passed for AC and heating. Outside unit got washed. The amperage for the compressor and fan motor passed. The capacitor passed as well. Thank you for choosing LBA services!
Came up here for a furnace tuneup. First unit itself was looking perfectly fine that controls basically the downstairs and the upstairs level everything checked out within the heating mode of flame sensor was cleaned out amperage on the inducer and blower was good. Blower wheel is clean replaced filter is well on both units. checked out on the second unit itself. Blower wheel was extremely dirty. Flame sensor did need to be replaced just due to the where on it you know it might not detect flame here and there, as well as the heat exchanger inside was pretty bad rusted which can lead to further issues within the unit itself replace the filter is well on that unit. Thank you for choosing lba
Scheduled repairs for Wednesday next week 10/02
Pulled toilet, scoped main line, found an offset in pipe where it 90s. Had to cut out drywall
Sold a new water heater. 50 gallon gas water heater
Finished heating maintenance on all RTUs. RTU 1 has a roll out switch bad on it will need replaced for unit to heat properly RTU 2 has a bad inducer motor causing system to not function properly during heating. Will need to be replaced for unit to heat properly. RTU 15 capacitor on inducer is reading lower than recommended range. Unit is operating in heat currently but would recommend cap be replaced.
Provided a quote for Hydro jetting
Arrived to remedy a system that was making a strange noise and didn’t seem to be keeping up in the heat. Checked over the inside portion of the system. Found that the system has a 24 degree temperature split. Found that the system is operating within manufacturers specifications as far as the systems static pressure goes. Went outside and performed diagnostic. Was getting some low refrigerant readings, but with a lack of a heat load inside and outside the refrigerant levels would look that way. Performed an electronic leak search and searched with soap and bubbles. Was unable to find the leak. Determined we need to check the systems levels on a warmer day with a heat load inside as well as outside. Charged the system with uv dye to aid in the leak search if the system is still reading low on a warmer day. Scheduled return for Monday.
.
9-25-24 On site at 8:30 pulled off at 0915 customer didn’t show up. Just need to reschedule it.
Added returns
Jackie requested a quote for system replacement. Performed a system check to probe the health of the system. Equipment is exceeding staic (air) pressure cause by airflow restrictions in the airflow design (ductwork). This has led to accelerated degredation of key components: heat exchanger, outdoor fan motor, capacitors, etc. He moved in 2 years ago and has had issues with his system since, at least, July. Recently the indoor and outdoor units started freezing. He has had several bids from multiple companies and has been living with this for about a week. Followup phone call scheduled for Thursday afternoon
Arrived with Scott Fletcher for quote on new ac.
Control Board Replacement and transformer
Customers paid $519.44 into the four-star repair cost of $2077.77 for Control Board Replacement and will pay the remaining cost once job has landed
.
Sold 2 star
Arrived to customers for AC check up inspection received a call on static pressure along with a capacitor, those outside of manufacturer specifications. We’ve also discovered that a bit rusty. other than that all of the components and refrigerant Levels met within factory specs.
Dispatch supervisor to asses.
X
Sold
Sold
Sold
Sold
Went in for a maintenance call today. Changed filter due to the old one being dirty. Blower amperage passed. Blower wheel was clean. When checking the heat exchanger I noticed cracks. So I red tagged the furnace. I also shut off the gas for the furnace. Thank you for choosing LBA Services!