Olathe, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Olathe, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Olathe, KS.
Recent Jobs and Reviews in Olathe, KS
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction with the service provided. Customers consistently express appreciation for the professionalism, efficiency, and expertise demonstrated by the technicians. Recurring themes include prompt and timely service, with many reviewers highlighting how quickly issues were diagnosed and resolved. The technicians are frequently praised for being friendly, courteous, and communicative, taking the time to thoroughly explain problems and solutions in clear, understandable terms. Many customers specifically mention feeling confident that they were not being upsold unnecessary services, which they found refreshing and trustworthy. The quality of workmanship receives high marks, with reviewers noting thorough inspections, attention to detail, and jobs completed efficiently—often within hours. Several customers express gratitude for cost-effective solutions and fair pricing, with some noting significant savings compared to other estimates. The membership and maintenance programs are highlighted as providing excellent value and peace of mind. Overall, the tone is enthusiastic and appreciative, with many reviewers stating they would highly recommend the service to others and plan to use the company again in the future. The sentiment reflects a customer base that feels well-served, respected, and confident in the technical abilities and integrity of the service providers.
Olathe, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Olathe, KS in October 2024.
The most recent job was on October 8, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 149 jobs in Olathe, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Came out here for a furnace inspection. Upon arrival tested static pressure static was passing as well as CFM’s unit was only a year old everything within the unit was perfectly within range, capacitor inducer, amps blower amps cleaned out flame sensor filter was replaced already ensure that all the heating mode work perfectly fine thank you for choosing LBA
Out today for plumbing maintenance inspection. Five star with homeowner went well. Homeowner. Approved inspection. Stacks coming into concrete in basement are ABS. A new walk-in shower has also been installed less than three years ago in the master bath. The only cause of concern is some calcification on copper fittings above the water heater that are included in the photos. Gave homeowner option to provide quote for repair and replacement of tees, homeowner declined at this time. Cleaned up work area did not collect (PMI)
(10-8-24)Out today for plumbing maintenance inspection. Homeowners are going to Arizona for the winter and wanted to make sure everything was functional. Inspected thoroughly all plumbing systems and fixtures, all fixtures and systems are new as the home is 10 years old. Advised homeowner battery back up system is non-functional and gave option to pursue quote, homeowner declined at this time. All other fixtures and systems are functional. Cleaned up work area did not collect due to maintenance inspection.
Went for a maintenance call today. When going to furnace tested for static pressure. System rated for .8. System operating at .8 max rating for factory specifications. Did leave an extra filter for customer.Did CO reading for furnace. Did get a reading for CO on furnace. Had supervisor reverify readings. Did get a higher reading than previously. Red tagged system customer signed red tag. System can be ran during cool (NOT HEAT). Left customer paper work on what was done to unit. Thank you for choosing LBA services.
Na
Na
Na
Na
Completed heating maintenance on 3rtus and on air handler. Heat strip in air handler are bad will need to quote repair. Picture of p/n has been added
Sold
Sold
Sold
Sold
Excavated approx 45ft trench from the house to the water meter in the front yard. - Drilled new 1in hole through foundation wall. - Stubbed new copper inside the home. - Connected to 3/4in copper just outside the meter using a CTS pack joint, rated to be installed under the ground. - Installed new 3/4 flared entrance valve inside the home. - Intalled new PRV with pressure gauge. - Reconnected to 3/4in copper feeding the home. - Opened up bath tub spout and outside spiggot. - Turned water on to purge air and debri out through bath tub and outside spiggot. - Close both valves and tested new waterline and connections and checked for leaks. - No leaks were present, everything working as it should. - Backfilled excavated dirt.
Went for a maintenance call today. Upon arrival went to furnace. Age of furnace is 9 years on system. Tested for static pressure for furnace. System rated for .5. System operating at .4. Passing for manufacture specifications. Did cfm for ductwork. Cfm passes for both supply and return. Did CO reading for furnace did get a reading showed customer. Checked heat exchanger as well. Did find crack on the heat exchanger. Had supervisor to confirm crack. Supervisor did confirm heat exchanger was cracked. Red tagged system customer signed tag. Supervisor will have solutions for customer.
Arrived to install some smart ac sensors and set the homeowner up on the smart ac app. Documented system model and serial numbers. System is fully operational.
Upon arrival I began the furnace tune up. We are doing furnace and AC tune ups today. First, I did a static pressure test on your system which is rated for a max of .5 and your system is testing at .6. I recalibrated your blower motor to try and lower the static pressure but was unsuccessful. I found that the electrostatic filter is the cause of restriction causing the static pressure to fail. We discussed this with the homeowner so they understand what that meant. I checked all the electrical components which were testing within the manufacturer specifications. The temperature rise was at 48 degree which is within specs as well. I also checked the AC unit. The compressor and fan motor running amps were within specs. The dual run capacitor is a size 45/5mfd and both sides were at 100%. The refrigerant charge looks good and lastly, I rinsed all the debris/cottonwood off the unit. I recommend having your blower motor cleaned at your earliest convenience. I will send an email with the quo
Furnace #2 still had jumper wires on the unit from the maintenance and was landed on C and R. Pulled jumpers and replaced 3 amp fuse and the system ran as it should be. Unit number 6 had a reset fuse. I push to reset the fuse. Also both upper and lower door was left off so the system couldn’t have ran anyways if it didnt pop the fuse.
Went for a maintenance call today. Tested for static pressure static rated for 1.0. System operating at .53 passing for manufacture specifications. Did replace filter for customer. Filter is 20X25X1 electro static filter. Did notice humidifier water panel needed to be replaced. Customer approved to be replaced. Replaced water panel for customer. Cleaned out flame sensor and pressure switch hose. Temp split for system is passing. Blower wheel is clean as well. All electrical components for furnace are passing. System is up and running before leaving. Thank you for choosing LBA services-Johann.
Upon arrival the thermostat was not working properly. It was turning the system on and off in both heating and cooling modes but the thermostat was blinking heat when the heat was on and the Heat symbol should not blink once it’s running. We diagnosed the thermostat had gone bad. Per Andy Davey instructions we replaced the thermostat with the Aprilaire Model#8466 and now this system is operating properly. No charge for todays visit. If you have any questions or concerns please contact us. Have a great rest of your week!
Replaced head unit on novo filtration system
Arrived for furnace maintenance today. Ran a combustion analysis and fuel is burning properly. Checked heat exchanger and found no cracks. Carbon monoxide test reading is zero. Found bacterial growth on evap coil. Blower wheel is collecting dust. With customer approval we pull and cleaned blower wheel, installed UV bulb, and replaced saddle valve on water heater. Renewed membership and set up smart ac today. System is running upon departure. Thanks for choosing LBA.
Warranty repair, replaced filter drier, TXV, reclaimed refrigerant and weighed in new charge. System is operating within manufacturer specifications. Advised customer to call if they note any irregularities.
10/2/24 - Completed a full heating maintenance on one RTU. The filters were changed, the heat exchanger was checked, and proper operation was tested. Overall, the unit was in good condition, it was running well, and there were no issues found at this time.
Found leak in wall from previous renovation that caused leak. Customer will be remediating the wall before we complete the repair