Olathe, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Olathe, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Olathe, KS.
Recent Jobs and Reviews in Olathe, KS
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction with the service provided. Customers consistently express appreciation for the professionalism, efficiency, and expertise demonstrated by the technicians. Recurring themes include prompt and timely service, with many reviewers highlighting how quickly issues were diagnosed and resolved. The technicians are frequently praised for being friendly, courteous, and communicative, taking the time to thoroughly explain problems and solutions in clear, understandable terms. Many customers specifically mention feeling confident that they were not being upsold unnecessary services, which they found refreshing and trustworthy. The quality of workmanship receives high marks, with reviewers noting thorough inspections, attention to detail, and jobs completed efficiently—often within hours. Several customers express gratitude for cost-effective solutions and fair pricing, with some noting significant savings compared to other estimates. The membership and maintenance programs are highlighted as providing excellent value and peace of mind. Overall, the tone is enthusiastic and appreciative, with many reviewers stating they would highly recommend the service to others and plan to use the company again in the future. The sentiment reflects a customer base that feels well-served, respected, and confident in the technical abilities and integrity of the service providers.
Olathe, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Olathe, KS in October 2024.
The most recent job was on October 28, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 149 jobs in Olathe, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Came out here for a maintenance on a air handler upon arrival tested static pressure static was good. CFM‘s were passing as well. I took amps on the heat strips as well as the blower both both were within range blow. It was good. We did see some mold or biological growth starting to form which my supervisor did inform them on we did have a little of an accident. A circuit breaker decided to give out re-installed one have the unit up and running. Thank you for choosing OPA services.
Happy call
Heating System Repair Service: The client’s heating system was cycling erratically. After recalibrating the thermostat, the system regained consistent temperature control, improving comfort and efficiency throughout the home.
Replace Furnace and A/C (condenser and evaporator) that condition the upstairs space.
Completed heating maintenance on all rtus and unit heaters North Rtu Lennox unit has holes in the heat exchanger. Gas has been shut off at shut off valve and at gas valve.
Theresa pointed out a spot on the ceiling tiles where condensation had previously caused water damage. A new spot had formed and was leaking from a coupling in the furnace flue. Observed a crack in the water heater exhaust during system inspection. Repaired the leaking fitting, rebuilt the water heater exhaust, and adjusted the refrigerant charge to match the system performace that is possible given the inadequate ductwork. Brant and Theresa stated that the upstairs rooms, particularly their children's rooms, are hotter (in the summer) and colder (in the winter) than other places in the house. They understand that the insufficient duct size is preventing their kid's rooms and the rest of the home from conditioning properly. Explained that airflow is one of the many things that are covered in our comprehensive checks for both heating and cooling checks. Good airflow is paramount to a long system life, low operating costs, and the comfort of the family in all rooms of their home.
Replace indoor coil
Out today to complete work as bid. Upon arrival replaced piece of 3 inch line and ensure that everything was installed properly. Tested no leaks cleaned up work area did not collect.
.
Adjusted and verified operation of thermostat
Upon arrival I began the furnace tune up. First, I did a static pressure test. System is rated for .5 and it’s testing at .48 which is within specs. Next, I checked the running amps on the inducer motor and the blower motor. The blower amperage is within specs but the inducer amperage is at its max which is due to age. I spoke with both homeowner about this and will send them an email with estimate for a new inducer motor. I cleaned the flame sensor. I checked the temperature rise which was at 50 degrees and that’s within specs. I noticed the humidifier pad needs to be changed. They are going to get a new humidifier pad and replace it on their own. Lastly, I noticed this furnace has no surge protector on it. I offered the surge protection but they opted not to purchase that today. I will include it in the email estimates for them though. If you have any questions or concerns please let us know! Have a great weekend ahead! P.S. Took payment in the amount of $47 by CC for todays tune up.
Declined
x
Presented customer with estimate for full system replacement.
Completed heating inspection on three funraces (two for the home, one for the garage). All units are between 11 and 13 years old. Water damage and rust build up present on all three heat exchangers. Burners are rusty on all units. Main floor: mild, upstairs: moderate, garage: severe. All three fan assemblies are due for deep cleaning. The fan wheel on the garage unit rubs against the fan housing indicating the motor bearings are out of alignment.
Corrected thermostat settings so heat pump functions properly. Replaced customers humidifier water pad.
Na
Na
Na
Na
Out today to install RO faucet for previous work bid and sold. Upon arrival homeowner is not present, attempted contact multiple times. We will reach out to reschedule.
Upon talking to the homeowners, we’ve cleared up the miscommunication, they understand that replacing the shut offs would be more involved than just swapping them out, we will have to order specially some CPVC compression stops for the laundry box because that’s what’s there, either that or open up the drywall underneath to convert to pex. They wanted a quote emailed for both options, we will return if and when a quote is pursued.
Upon arrival I began the furnace tune up. Furnace was installed by us in October of last year 2023. First, I did a static pressure test. Your system is rated for .9 max and your system is testing at .46 which is passing with ease! I checked the running amps on the inducer motor and blower motor and both were within manufacturer specifications. The blower wheel was clean as well as the control board. Your system is running properly at this time. If you have any questions or concerns please contact us. Have a great rest week! P.S. took payment via CC in the amount of $47.00.
Tenant reports that the system is not operating at all. Found the thermostat hanging by a wire off the wall. I appears to have been forcefully dislodged from where it was mounted. Remounted/rewired the thermostat and tested operations. System operating properly in cooling and heating modes. Breakdown was not caused by anything related to the equipment installation or subsequent services.
Arrived for furnace maintenance today. Checked static pressure and found it s above the manufacturing specifications. This can causing extra wear and tear on the system. Dave does not want to mess with static at this time. Heat exchanger is looking good with no rust or crack. Carbon monoxide test was 0 ppm. The fan motor is running high, caused by high static. The blower wheel is collecting dust and needs to be cleaned. That was declined today. Will try to get done in spring. I changed batteries in the thermostat. When I put the new ones in the furnace was turned off downstairs. The screen on the stat just said off. No buttons could be pushed. I took batteries out and pulled thermostat off the wall for about 5 minutes. Screen went blank. Put stat back together and screen came on and was functional. I took the batteries out two more times and then reinstalled them to make sure screen came on. It did. System running upon departure.