Olathe, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Olathe, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Olathe, KS.
Recent Jobs and Reviews in Olathe, KS
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction with the service provided. Customers consistently express appreciation for the professionalism, efficiency, and expertise demonstrated by the technicians. Recurring themes include prompt and timely service, with many reviewers highlighting how quickly issues were diagnosed and resolved. The technicians are frequently praised for being friendly, courteous, and communicative, taking the time to thoroughly explain problems and solutions in clear, understandable terms. Many customers specifically mention feeling confident that they were not being upsold unnecessary services, which they found refreshing and trustworthy. The quality of workmanship receives high marks, with reviewers noting thorough inspections, attention to detail, and jobs completed efficiently—often within hours. Several customers express gratitude for cost-effective solutions and fair pricing, with some noting significant savings compared to other estimates. The membership and maintenance programs are highlighted as providing excellent value and peace of mind. Overall, the tone is enthusiastic and appreciative, with many reviewers stating they would highly recommend the service to others and plan to use the company again in the future. The sentiment reflects a customer base that feels well-served, respected, and confident in the technical abilities and integrity of the service providers.
Olathe, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Olathe, KS in November 2024.
The most recent job was on November 18, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 149 jobs in Olathe, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Need to call cx back on Wednesday morning at 9 a.m.
Fixed r/a panning
Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Found that the system is operating with failing static pressure. Reached out to a field supervisor to finish the diagnosis on the systems static pressure. Verified operation of all mechanical and electronic components in the furnace. Cleaned the flame sensor and retested its performance. Checked blower for cleanliness and to see if there is any play in the bearings. Found that the blower wheel is coated in dust debris. Checked systems heat exchanger to ensure proper venting of flue gas. Performed an electronic gas leak search. Spoke with homeowner about the system. Replaced humidifier panel and furnace filter. Furnace is operational at this time.
Arrived for furnace maintenance today. Furnace is 14 years old. While checking the heat exchanger if found a couple holes in it. This compromises the unit and it can’t run because of the carbon monoxide that will leak out. Red tagged system. A field supervisor is out to discuss replacement options.
Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Found that the system is operating with failing static pressure. Found that the system did not have an efficient burn. Found that the termination kit was installed wrong and fixed that. This brought the burn back to factory specifications. Verified operation of all mechanical and electronic components in the furnace. Cleaned the flame sensor and retested its performance. Checked blower for cleanliness and to see if there is any play in the bearings. Found that the blower wheel is heavily coated in debris. Checked systems heat exchanger to ensure proper venting of flue gas. Checked for carbon monoxide in the air stream. Performed an electronic gas leak search. Spoke with homeowner about the system. Installed the proper sized filter and left one behind to be installed in one month. Furnace is operational at this time.
Out today for steady, consistent drip downstairs coming from ceiling. Quoted homeowner $59 for access, homeowner approved. Upon inspection discovered pinhole leak from bend in polybutylene line. Quoted homeowner $292 for repair and waived $59 trip charge, homeowner approved. Installed waterline spot repair successfully, tested, no leaks. Cleaned up work area and collected paid with a card. Thank you for choosing LBA services!
X
I was shown a a water spot on a ceiling tile and when I above grind there is water marks on the roof from a leak somewhere from the roof not are equipment. The unit that was making nose I ran threw all function heating and cooling. I could not hear anything abnormal. Tested inducer flame rail blower motor. All have passed and everything is working as it should be at this time
Sent invoice and email to customer with all pictures and invoice summary
Upon arrival I began the furnace tune up. First, I did a static pressure test. This system is rated for maximum of .5 and your system tested at .48 which is passing at this time. Next, I checked the running amps on the inducer and blower motor and both were testing within the manufacturer specifications. I cleaned the flame sensor. Cleared the hoses and pressure switches. The filter was very clean and did not need replaced at this time. The flue looks good, I didn’t find any rust or weak spots in the flue. My CO test showed Zero PPM. Lastly, the temperature rise was at 42 degrees which is within the specs of between 30 to 60 degrees. If you have any questions or concerns please feel free to call us. Have a great weekend! Your LBA Technician, Tyler Rickard P.S. No payment was due for todays visit, it was covered by your membership today.
Happy call
Maintenance.
Installed smart ac sensors for customers
W
Arrived to customers for a furnace tuneup, and during the inspection, receive the high calling static pressure other than that all other components met within Factory specs
L
L
L
L
Went for a service call today. Control board was giving me a fault code “twinning fault”. After resetting the breaker, the furnace ran multiple times and is up and running upon departure. Thank you for choosing LBA services!
Warranty call in progress. Fernco coupling waaaas lloose from the factory and caused water to leak onto the floor of the unfinished basement. secured the coupling and the leaking stopped. Connected Ecobee thermostat. Room sensor included with the thermostat was not connecting so Ecobee is sending a replacement (7 - 10 business days shipping). Rewired the outdoor unit so it would work with the new system configuration. Tested the system in heating and cooling mode. Return visit needed to install the warranty Ecobee room sensor.
Went for a maintenance today. Did a static pressure test, it passed. Filter and ducts are clean. Humidifier is working properly. Heat kit amperage passed. Blower motor amperage passed. Blower wheel is clean. Temp split between the supply and return duct passed. Heat pump outside is clean. Fan motor and compressor amperage both passed. Capacitor passed as well. Thank you for choosing LBA services!
Came out here because customer said there was a little airflow coming out the vents checked everything for him. Everything was open. I did replace the filter with a high flow filter, seem to me like the airflow was better. Customer does have high static and we propose options to help with that airflow improvement.
Out today to install laundry box valves per bid. Installed half-inch IPT laundry valves successfully, tested, no leaks. Cleaned up work area did not collect. Thank you for choosing LBA services!
During heating inspection, found the primary heat exchanger was no longer sealed. The press fittings on the back of the heat exchanger have failed. Attched is a video demonstrating this, as well as documentation from the Heat Exchanger Experts inspection handbook. Tim authorized the installation of a replacement heat exchanger. They will be notified once the component is in hand. He understands that either a payment plan or some other means of funding would need to be solidified before replacement heat exchanger installation. The gas and gas valve have been turned off to the unit, per safety requirements. Tim is aware of the hazards and has been advised to not run the system in heating mode until the heat exchanger has been replaced. Tim declined temporary heaters and said that they had a few around the house they could use, "It won't get too cold over the next week." Tim said. If they change their mind they can reach out to the office and have some run out to them. Shipping time