Olathe, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Olathe, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Olathe, KS.
Recent Jobs and Reviews in Olathe, KS
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction with the service provided. Customers consistently express appreciation for the professionalism, efficiency, and expertise demonstrated by the technicians. Recurring themes include prompt and timely service, with many reviewers highlighting how quickly issues were diagnosed and resolved. The technicians are frequently praised for being friendly, courteous, and communicative, taking the time to thoroughly explain problems and solutions in clear, understandable terms. Many customers specifically mention feeling confident that they were not being upsold unnecessary services, which they found refreshing and trustworthy. The quality of workmanship receives high marks, with reviewers noting thorough inspections, attention to detail, and jobs completed efficiently—often within hours. Several customers express gratitude for cost-effective solutions and fair pricing, with some noting significant savings compared to other estimates. The membership and maintenance programs are highlighted as providing excellent value and peace of mind. Overall, the tone is enthusiastic and appreciative, with many reviewers stating they would highly recommend the service to others and plan to use the company again in the future. The sentiment reflects a customer base that feels well-served, respected, and confident in the technical abilities and integrity of the service providers.
Olathe, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Olathe, KS in December 2024.
The most recent job was on December 16, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 149 jobs in Olathe, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Completed furnace maintenance for customer. All aspects of system tested within manufacturer specifications. No recommendations at this time.
Had a service call today. Furnace wasn’t draining properly, drain was going slightly up hill, also the inducer housing had water in it. After adjusting the drain and cleaning the inducer housing, the furnace is draining properly. Thank you for choosing this LBA services!
Tested and inspecting line that was previously jetted
Furnace installed above grid
Flowing
Upon arrival I began the furnace tune up. This is a 2021 Trane System. First, I ran the static pressure test. This unit is rated for a maximum of .7 static pressure and it’s testing at .85 which is over the max. I spoke to the customer about this, the last tech tried to sell a 25k airflow package for this unit last time out. I don’t think it needs anywhere close to that much done to it. It’s above the max by .15. Next, I checked the running amps on the inducer and blower motor and both were amping within manufacturer specifications. I cleaned the flame sensor, replaced the filter with a new one size 20x25x1 inch. The temperature split was at 120 degree - 70 degree puts the temp rise within specs at 50 degrees. The flue was in good shape, no rust at this time. If you have any questions or concerns please feel free to call us! Your LBA Technician, Tyler Rickard P.S. No payment was due for todays visit, it was covered by your membership. Have a great weekend!
Estimate
Installed new customer supplied kitchen faucet and sink. Went from double compartment to single compartment, re plumbed for single compartment. Tested for leaks. Cleaned up. As of right now homeowner has not paid, told homeowner office will reach out tomorrow to collect payment for work completed.
Full System and new Ductwork
Installed new furnace and two supply airs, raises furnace and coil to put filter under it.
Today the make-up air heater was diagnosed, repaired and the temperatures set to adjust for the temperature sensor location. This make-up air unit utilizes an indoor temp sensor that turns the unit on and off dependent on the inside air temp. This make-up air unit is not a constant on or off dependent on the outdoor air temp. The unit was locking out on a safety at the ignition board. It was traced back to the flame sensor. The flame sensor was tested and then cleaned based on a low signal back to the control board. After the flame sensor was cleaned the unit returned to normal function however I noticed that the set-point was turning it off. I traced the thermistor for the temp control and found it running into the ceiling supports. The temp controls were set accordingly and the unit then smoothed out it’s on/off cycling. At this time the unit has ran and was function checked for 45 mins. I spoke with Ed about what was discovered and corrected today. The unit is fun
Completed furnace maintenance and inspection. I checked all components and amp draws. I tested air pressure and temp splits. I cleaned up furnace and flame sensor. I also dusted off humidifier and water heater. I found dust building up inside the system so I looked at the ductwork and found a lot of dirt inside the ductwork. I showed customer pictures and after I uploaded the pictures to the account my field supervisor arrived to provide a second set of eyes on the system. We went back through the pictures and showed customer solutions to fix the issues.
Went for a maintenance call today. Started with the furnace. I did a static pressure test, it passed. Did a carbon monoxide leak and gas leak test, no leaks. Combustion analysis test passed. Inducer motor amperage passed. Gas pressure met factory specifications and pressure switch passed. Temperature split between the supply and return duct passed. Blower motor amperage passed and blower wheel is clean. Filter got changed. Moving to the air handler. Did a static pressure test, it passed. Tested the heat kit it passed. Blower motor amperage passed and blower wheel is clean. Temperature split between the supply and return duct passed. Filter got changed. Mini splits are heating. Blower wheel is clean and there is no growth inside of the heads. Checked the connections at the heads and at the condensers for refrigerant leaks, there is no leaks. Thank you for choosing LBA services!
Clean and seal decline
W
W
W
W
Z
Went for a furnace inspection today. Did a static pressure test, it failed. Did a carbon monoxide leak test, it has a leak. After looking at the heat exchanger, I noticed severe heat marks. Thank you for choosing LBA services!
We just installed aprilaire thermostat p/n APR863A. This thermostat has failed. I replaced thermostat with a Honeywell focus pro 5000 model number TH5110D1006. Unit is functioning properly at this time
Customer insist on getting cheapest quote possible
Went for a furnace inspection today. Did a static pressure test, it passed. Did a carbon monoxide test, there is a leak. After inspecting the heat exchanger, I noticed severe water damage on the coil. The furnace is red tagged and gas is shut off. Thank you for choosing LBA services!
- Spot repair in the backyard. - Excavated down approx 6.5ft deep. - Found an offset from clay to cast iron 90 at the manhole. - Installed outside cleanout in repair hole. - The offset is about 40ft from the cleanout. - Bed new plumbing in gravel. - Hauled off job-related spoils.
Filter are clean also look brand new. Found minor gas leak on a mega press union that was only hand tight. I tightened union and tested for gas leak. There is no longer any gas leak. Very odd tho it was only hand tight. No door are open when I arrived. Bad gfi outlet and need to call a electrical company to repair and test