Olathe, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Olathe, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Olathe, KS.
Recent Jobs and Reviews in Olathe, KS
Customers say: The overall sentiment across these reviews is overwhelmingly positive, reflecting strong customer satisfaction with the service provided. Customers consistently express appreciation for the professionalism, efficiency, and expertise demonstrated by the technicians. Recurring themes include prompt and timely service, with many reviewers highlighting how quickly issues were diagnosed and resolved. The technicians are frequently praised for being friendly, courteous, and communicative, taking the time to thoroughly explain problems and solutions in clear, understandable terms. Many customers specifically mention feeling confident that they were not being upsold unnecessary services, which they found refreshing and trustworthy. The quality of workmanship receives high marks, with reviewers noting thorough inspections, attention to detail, and jobs completed efficiently—often within hours. Several customers express gratitude for cost-effective solutions and fair pricing, with some noting significant savings compared to other estimates. The membership and maintenance programs are highlighted as providing excellent value and peace of mind. Overall, the tone is enthusiastic and appreciative, with many reviewers stating they would highly recommend the service to others and plan to use the company again in the future. The sentiment reflects a customer base that feels well-served, respected, and confident in the technical abilities and integrity of the service providers.
Olathe, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Olathe, KS in March 2025.
The most recent job was on March 14, 2025.
LBA Air Conditioning, Heating & Plumbing has completed 154 jobs in Olathe, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Was able to get drain open without extensive repair.
3-13-25 charge warranty call On 3-12-25 I replacement the motor on the east range hood exhaust fan. I adjusted the motor pulley however the adjustment increased the airflow and sound. I readjusted the motor pulley out to basically where it was for. Spoke with Moran pay with the adjustment which lowered the sounds on underneath. The hood system is working. The tension is good.
3-12-25 Moran did did accept my written proposal for the motor replacement. However, since he approved the work while I was on site, I switched this ticket over to T&M I ordered and picked up a new blower motor for the east exhaust fan. Installed the new motor aligned the pulleys also replaced the blower belt checked for proper tension, Unit is working at this time. The exhaust does have a little bit of a rattle/ vibration that may be down in the blower wheel itself. I grease the bearings. West exhaust unit,I did replace the belt and is working at this time East unit CaptiveAire Model# NCA18FA Job# 1295089 02/2011
3-12-25 Performed AC tuneup on 1- 5 ton carrier unit. Check out sheet. Two kitchen range exhaust fans Grease the bearings on both unit Unit as a bed fan motor that is tripping the circuit breaker I get proposal to replace Proposal for both belts to be replaced Currently the east unit is running however, if he turns the circuit breaker off tonight, the motor will probably not come on tomorrow morning. This is either has bad bearings in it or the capacitors area shoot
I found on rtu 2 that the blower motor has failed and the system has been shut down. Sending estimate on replacement. Blower motor in N.K.C 3/4 hp 460 volt
Dispatched for no hot water after a tankless tuneup. Upon arrival, there was no hot water coming out of any faucets, but the cold water was. Verify water to the tankless and a tankless outlet was turned off. I reopened the outlet from the tankless and verified hot water to each faucet. Thank you for joining the perfect family club and choosing LBA services.
Replaced flame sensors and flushed water heater
No nswer
Preformed plumbing inspection, ran camera down drain, found clog in the garage
Shower p-trap
Install 1/4 turn add a line shutoff for humidifier. Thank you for choosing LBA Services.
Completed full cooling maintenance on the split system. the west side of the building location. Replaced 20x25x1 filter and the batteries in the thermostat. All test pass for cooling.
Arrived to do a performance maintenance and complete previously diagnosed repairs. Reached out to a field supervisor to ensure the work being completed is what was previously promised and is what the system needs. Set up for combustion analysis, temperature split, static pressure test, and carbon monoxide tests. Found that the system is beyond its rated maximum rated static pressure. Changed furnace filter. Verified operation of all mechanical and electronic components of the furnace. Checked blower for cleanliness and to see if there is any play in the bearings. Found that the fan for both heating and cooling is starting to get coated in dust. Checked systems heat exchanger to ensure proper venting of flue gas. Spoke with homeowner about the system. Performed repairs on the flue in the attic. Furnace is operational at this time.
Dispatch for water leak upon arrival water was leaking from compression on humidifier solenoid. Tighten the bolt down on the solenoid no more leak. It was also leaking due to build up on pad. Purchased and installed new humidifier pad thank you for choosing LBA services.
Furnace maintenance. Need to replace flue.
Sold flue repair
Completed full cooling maintenance. Changed fliters washed coils and check full function of the 3 rtu. All units are running as they should be
Upon arrival I began the heating tune up on the homeowner Air Handler and Heat Pump. I started out testing in regular heat pump heating mode and my temperature split was within manufacturing specifications. The blower motor running amps are testing within specs as well. The blower wheel itself has gotten dusty over the last couple of years but it isn’t terrible currently. I recommend having your blower wheel cleaned approximately every 4 to 6 years. Next, I tested the system in the Emergency Heat mode which is electric heat strips instead of using the heat pump. The heat strips and heat pump are used in tandem with one another. The heat pump will go into defrost mode every hour or so and when this happens your heat strips engage and heat the home while the heat pump is defrosting. Then the heat pump engages again. Everything testin within manufacturing specifications today. I tested the static pressure on this unit as well. The static pressure is rated for a max of .5 and your system i
Installed new toilet
Leak was caused by excessive water flow to humidifier. Checked level, reduced water flow.
Customer called stating furnace was not operating. Customer found thermostat blank this morning and furnace was blowing cold air. Upon inspection of unit it was found that filter was very dirty restricting airflow and furnace was potentially overheating and locking out, replaced filter and flames dropped out, cleaned flame sensor and reinstalled, furnace lit and continued running. Home has came up in temperature but is 20 degrees from set point, advised customer it will take awhile to get there but it’s heating. Customer agreed to let me come back and complete a furnace tune up for him at a later date, contacted call by call to have put on the schedule.
Dispatched for popping noise when system shuts down and noise on startup. Upon arrival system was on and operating. When the system shuts down the duct work is popping due to increased static pressure because of dampers being closed. Advised for dampers to stay open to provide optimum airflow. Thank you for choosing LBA Services.
Water softner
Decline
Field supervisor coming out due to ppm reading in the duct work extremely bad rust on unit static pressure was failing HSI was bad blower wheel was extremely dirty blower motor had play in it inducer was leaking field supervisor is out retesting