Kansas City, KS Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Kansas City, KS and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Kansas City, KS.
Recent Jobs and Reviews in Kansas City, KS
Kansas City, KS at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Kansas City, KS between September 2024 and October 2024.
The most recent job was on October 6, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 131 jobs in Kansas City, KS in the last 12 months. The first job there was in December 2014.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Estimate
.
Toilet replacement estimate
Na
Install 95% furnace , 66k btu system 14 seer ac/coil
Customer called stating heat wasn’t working, had repair earlier in year and they didn’t turn gas valve back on, after starting heat took a carbon monoxide reading and it was higher than normal. Ran inspection camera and found compromised heat exchanger. Turned over to field supervisor to advise customer.
Arrived for furnace and mini split maintenance today. Started at air handler snd checked static pressure. Max is .5 and system running at .8 this is well above the max and will cause extra wear and tear on system. Heat strips are good. Blower wheel is clean. All electrical components are running properly. I checked on two mini split heads also. Temperature splits are good on both. Cleaned filters on both. Wiped down and cleaned both. Did not want to renew member today. Systems are running properly upon departure. Thanks for choosing LBA.
Completed furnace maintenance and inspection.I checked all components and amp draws. I tested airflow and temp splits. I cleaned flame sensor and cleaned up unit. Inducer motor is whining but not over amping yet. Exhaust had been leaking and I found one of the seal loose. Tightened it up and they should fix that. I fixed falling ductwork. Furnace is running at departure.
Completed heating maintenance Unit heater 3 has a bad thermocouple Unit heater 4 has a broken thermostat
Gave estimates and explained situation. Customer will not be going forward with repairs
Went for a AC maintenance today. When taking to customer only wanted for me to check condenser unit. When going to unit checked amperage for fan and compressor. Both are passing for manufacture specifications. Tested capacitor is passing within manufacture specifications. Checked refrigerant is within factory specification. Cleaned out unit for customer. System is up and running before leaving.
Estimate
Upon arrival I began the furnace tune up. First, I did a static pressure test. Your system is rated for a max of .9 and my test showed your system is too high at 1.3. Field Supervisor Nick L. came out to discuss options with homeowner. I checked all the electrical components were within specs. The blower wheel does need to be cleaned as your earliest convenience. The temperature split stats say it should be between 25 & 55 degrees and your system is at 48 degree which is within specs. System running at departure. If you have any questions or concerns please contact us. Have a great rest of your week!
Happy call customer just went over airflow
Furnace sale
Arrive to customers for furnace, tuneup and all components met within factory specs
Arrived for ac inspection and maintenance. I performed tuneup. During the tune up I saw the furnace was 22 yrs old. I informed customer of furnace and told customer I would like to perform a safety inspection to make sure furnace is safe to run. After inspecting furnace i found holes in the heat exchanger. I tested for carbon monoxide and the system was putting out over 13ppm and climbing. I brought out field supervisor and after confirmation we had to shut system off and red tag furnace. I turned gas off to the furnace and informed customer of process. Customer signed red tag. Ac is running great and is only yrs old however furnace is not running at departure.
Completed furnace inspection. All aspects of system tested within manufacturer specifications. Blower wheel is dusty, but unit is in an attic so it’s hard to prevent dust.
Happy
Happy
Happy
Happy
9/24/24 - Completed a full heating maintenance on six RTU’s. Filters were changed, heat exchangers were checked, and proper operation was tested. Unit 4 had a bad heat exchanger, gas has been shut off to the unit and W1 has been disconnected. The unit also showed an error code when tested, but an estimate will be sent over as it will need to be replaced. Other than that, all other units were in good condition, they were all running well, and there were no further issues found.
Na
Prv, toilet shut offs and sink shut off