Kansas City, KS HVAC & Plumbing Services

Followed up yesterday evening but customer feels he needs to do further research on his own.

For this job I replaced a main service valve and an outdoor hydrant to customer satisfaction

Arrived for ac maintenance today. Started at furnace and checked static pressure, it is failing. Blower motor amps are good. Blower wheel is starting to collect dust. There is a 18 degree temp split. I changed furnace filter. At the condensing unit all pressures and charge look good. All electrical components are running within manufacturing specs. I rinsed and cleaned up coil. System is running upon departure. Thanks for choosing LBA.

Following Up Next Day

Arrived to do a performance maintenance. Set system for cooling. Measured the systems static pressure measured a temperature split between return and supply air. Tested the capacitor for the blower motor. Found this capacitor failing. Checked interior of the furnace for cleanliness. Found that the blower wheel is heavily coated in dust debris. Also, found that the heat exchanger is heavily heat stressed. Went outside and verified refrigerant levels. Verified operation of all electronic and mechanical components. Rinsed coil free of debris. Spoke with homeowner about the system. With homeowners approval replaced the failing capacitor. Air conditioning system is operational at this time.

Hydrant successfully replaced so customer can have running water. Will be back tomorrow to finish replacing water shut off.

Na

A-1 Sewer & Septic Service performed the following services: - Excavated an 11ft deep trench. - Cut out 5 ft of 4-inch ABS - Installed 5 ft of 4-inch SDR using proper connections - Bedded pipe in gravel - The city inspected the repair, and the repair passed - Inspected the line from outside cleanout to City Main. No further repairs needed at this time. - Backfilled ditch to existing level. - Hauled off job-related spoils. Existing sewer Upstream and Downstream of the repair is not included in the labor warranty if found compromised 5 year warranty included

Dispatched for annual AC tuneup. At arrival system is operating. During the tuneup, I checked compressor, fan and capacitor. Also, during the inspection we checked pressures, static pressure, and temperature split. All components of the AC are all operating with manufacturer specs. Thank you for allowing us in your house to provide the perfect home service and for being a member of the perfect family service club from your LBA Service tech Calvin. If I provided a positive or five star experience. I’d appreciate you sharing your thoughts in a review.

Replaced stat and connected to wifi

Dispatched for annual AC tuneup. At arrival system is operating. During the tuneup, I checked compressor, fan and capacitor. Also, during the inspection we checked pressures, static pressure, and temperature split. All components of the AC are all operating with manufacturer specs. Thank you for allowing us in your house to provide the perfect home service and for being a member of the perfect family service club from your LBA Service tech Calvin. If I provided a positive or five star experience. I’d appreciate you sharing your thoughts in a review.

B

Sold job

B

B

Na

Proposed solutions for high static issue in the home and also replacement options just due to age

Went for an AC inspection today. Changed the filter. Static pressure failed on the system, definitely a restriction due to airflow. Temperature split between the supply and return ducts passed. Evaporator coil is clean and rust free. Blower motor amperage passed. Outdoor unit got washed. Compressor and fan motor amperage passed. Capacitor passed as well. AC is up and running upon completion. Thank you for choosing LBA services!

Decline on any flex duct repairs or hard piping the system , decline on IAQ as well

Customer requested quote on duct cleaning. Found that system is primarily flex duct. Assessed duct system and notified customer of deficiencies seen in attic. Field supervisor provided quotes on repairs.

5-1-25 Spoke to Bob on site he showed me the ac unit that it is not working It’s in the operations building, thermostats located in Chris Rooney’s office This is a package unit heat pump unit HP-1 Well, I got access to the compressor found the compressor terminal lug blown off, and the terminals were fried. Being in a heat pump system, I do not recommend replacing just a compressor too much possible damage to the reversing valve and the components Allied Air Model 7MHP10B24A-2A Serial 1609E06147 Elec heat 7.2 kw 240v 1ph I sent the information to Rick so we can hold our replacing the unit

4/30/25 - Completed a full cooling maintenance on three RTU’s. The filters were changed, the coils were cleaned, and proper operation was tested. Overall, the units were all in good condition, they were all running well, and there were no issues found at this time.

4-29-25 Sanctuary is not cooling well Spoke to the pastor upon arrival He showed me where the air handler is is the carrier unit when I got up there I could hear refrigerant flowing through the line and the blower was running. I turned the power power off to the two furnaces however the Freon continue to flow. Got up on the roof and checked the carrier unit found the contact it was stuck in the run. Installed a new contactor 2 pole 24volt Than started the system in ac mode.I found the system was low on refrigerant. One of the service caps was missing and the other three were loose and one did have oil around it. I shut the system down. I have approximately 175, 200 pounds of pressure in the system. I did a leak search at the expansion valves and outside with electronic search. All the piping is pretty much exposed I did not see any oil inside or did not pick up on any leaks. Spoke to the pastor, explained the contacted to him and I need to add refrigerant and approximately $105.00 p

I ran the system threw heating and cooling, tested all function of a 2024 unit. Everything for electrical to temperature all are within range and running as it should be at this time. I did smell a mildew smell in the office area when the system is running. I believe that it’s in the duct work and needs to be cleaned and disinfected for any mold and dust. At this time system is working properly.

Went for a maintenance call today. Static pressure is passing for system. All electrical components are passing for manufacture specifications. Refrigerant charge is passing. Temp split passes for system. System is up and running before leaving.