Independence, MO Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Independence, MO and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Independence, MO.
Recent Jobs and Reviews in Independence, MO
Independence, MO at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Independence, MO in July 2025.
The 25 customer reviews shown here average 4.8 out of 5.
The most recent job was on July 30, 2025.
LBA Air Conditioning, Heating & Plumbing has completed 59 jobs in Independence, MO in the last 12 months. The first job there was in January 2015.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Was declined on Synchrony and GoodLeap for a 2.5ton ac/coil $9497.29 she is going to fall back on home warranty and see what they can do but she is also open to having us bandaid if they can’t do anything.
Went for a maintenance call today, tested for static pressure and system is passing when in cool. Did inspect coil saw that it was dirty as well some rust forming. Temp split was low for manufacture specifications. Did clean condenser unit. As well replaced filter for customer. Blower amps are passing for the furnace. Went outside did check charge system is low for the unit. Hence for having a low temp split. Fan motor is running close to max amperage.Compressor is passing on amperage. Capacitor is also passing. Did have a supervisor come out to evaluate and have solutions for customer. Thank you for choosing LBA services-Johann
Patrick waiting on one last estimate before he makes a decision
Reevaluating ductwork that needs to be done. We are going to try to do as much as we can possible and stay under the budget of $7000.
We will be reevaluating the ductwork for the HVAC system on Sunday 3 PM. We will try to set it up in such a way that it is ready to branch off into the garage once that work is complete.
7/25/25 Blower motor ordered (quoted 3-5days from factory). To be shipped to shop Today I replaced the control board for the rooftop unit that serves the lobby. Once the control board was installed the unit failed system checks. The indoor blower motor was diagnosed today as having failed. This motor was checked using the dc voltage from the main control board once it was replaced today and functioning. Below is an estimate for the replacement of the failed motor. This is a time plus material estimate for the replacement of the indoor blower motor on the rooftop unit that serves the lobby (s/n ending 9161). The materials for this repair will be $1637.77. This includes the motor and esc module as they are only sold as paired. The motor is not available locally at this time and will be shipped from Carrier directly. The labor for this repair is estimated to be between 2-4hrs at a reduced rate of $139/hr. This repair will be covered under a one year warranty from the date
Estimate
Heat exchanger has multiple cracks, and the system has a leaking evaporator coil as well. Went over replacement options with customer , Patrick must speak to his sister who is currently at work as she is helping pay for the system as well
After returning to check the system, it’s clear that there’s a very large hole in the evaporator coil, which is causing refrigerant levels to drop drastically and freezing the coil. Because the system is old and is using 410 refrigerant I would highly recommend upgrading to the new refrigerant on a new system.
After checking the system, it was clear that the coil had become frozen not 100% sure why yet because I am unable to check levels. However, the furnace has been put through a lot and is cracking quite a bit. When you run it, you can smell carbon, and the size of the cracks are big enough to leak quite a bit of carbon dioxide into the air. I red tagged the unit And we have to look at solutions to get this fixed or replaced. Because the house is being sold it would be good to do everything at once that way we could save money and increase the value of the house. We will come back tomorrow with a plumber to look over everything and come up with the best possible solutions moving forward
Must return tommorow due to frozen coil, heat exchanger has multiple cracks and we are not able to run the system to thaw it out today
Unit s/n18262675JA found the fuses in the disconnect blown. I tested both stage one and stage two compressors and found stage 2 compressor is short to ground and needs to be replaced. I un hooked the second stage and replaced the fuses. System is now running on one stage. Will send info to rick for estimate to be sent for replacement.
Due to the furnaces irreversible damage and age, parts are unavailable for this specific model of furnace. This takes repair options off the table and the furnace requires replacement. The current equipment is unsafe due to damages on the HX. The system has multiple part failures at this time and is non repairable .
B
Est to dig
(7/21/24) Today when I arrived I discovered that there was no control voltage at the R terminal on the control board. I traced the schematic and confirmed that there is control voltage arriving at the control board. During this diagnostic it started to rain. This call will be rescheduled asap Thank you, Jon Tech notes: Carrier m/n 48FCEA04A2A5A0A0A0 S/n 0420C7961 24v at main plug, position 1, // no voltage at R terminal. Called tech support to confirm before replacing board (Left Message). Rain moved in and had to pull off job.
Went for a repair today. House is cooling system is keeping up. Did notice water sensor tripped. A pvc line was a bit loose. Hence for the sensor to go off. Did glue piece back together. Unit is up and running before leaving. Thank you for choosing LBA services-Johann
Board replaced unit does cool and heat. Amperage is passing for blower. Board is receiving correct voltage. Unit is up and running before leaving. Thank you for choosing LBA services-Johann
B
Went for a maintenance call today. Tested for static pressure, system is passing when in cool. All electrical components are passing for manufacture specifications. Refrigerant levels are passing with a passing temp split. Did clean condenser unit and replaced filter. Will recommend getting a duct cleaning. System is up and running before leaving. Thank you for choosing LBA services-Johann
B
Presented options
System has a refrigerant leak. Leak has to be very tiny. Looked in the evaporator coil, the condenser, and the line set. Couldn’t find a leak. Charged system back up. Put refrigerant dye and sealant in the system. Thank you for choosing LBA services!
EST to dig
Need to return after coil is done thawing
Friendly and explained everything to me.
He was very professional very courteous we we both felt he was a very good plumber Yelp
Jerry (tech) arrived on time, was respectful and worked hard in the hot attic to get my AC up and running. he called later to verify that all was in order. All in all I was very pleased.
I have used LBA for many years and plan to continue.
AC went out. Called, arrived the next day. Repaired, had it up and running by 6pm.
The only problem I had was when Michael came to the front door he said he was there to service my furnace. He was reading this off his tablet so when I made the appointment to have my air conditioner maintained they got it wrong he immediately changed his tablet and came in and maintained my air conditioner with great service
Very professional and polite. Great price too
Angelina was very friendly and explained everything she was doing and why. Very pleased with the work and the experience. Punctual and fast work.
I appreciated Kent listening to what I thought my problems were. I appreciated he gave me different options and let me choose the option I wanted. He fixed my problem in a reasonable amount of time. He was pleasant.
Kent was very courteous and professional. My concern deals with the pricing model LBA is using. I supplied the new part, so all they supplied was the expertise and time (< 1 hour). Even with a $50 off online coupon my bill was $208. That seems a bit high to me. I had a friend who will be needing a plumber, but I can't recommend LBA due to this "one size fits all" approach.
Service tech was both knowledgeable and personable. Quickly replaced the malfunctioning garbage disposal left no mess or signs that she had been there. Very pleased.
Very efficient work. Easily understood.
Nathaniel Reece did a good job. I was impressed that he worked out a reasonable price to install my new garbage disposal even though I disagreed with the pricing options the company provided. He was mannerly and quick to complete the job.
Jerry was very efficient and courteous. He is easy to talk to and answered questions with respect.
The technician was very knowledgable and professional. He did a good job in a timely manner.
Great service
Reliable, quick, kind, and no issues!
The technician was very knowledgeable and explained what she was doing as she moved through the process of resolving our issue. She as successful in resolving the issue in a timely manner given the situation she faced.
She was courteous and efficient and went right to work.
It use to be great but with a 166% increase in service price, I don't know?
very kind & informative repairman. thank you!
plumbing
Timely service and excellent work.
Service person very friendly and knowledgeable.
Kent and his associate were polite courteous and efficient. I am delighted that they resolved my plumbing issue.