Independence, MO Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Independence, MO and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Independence, MO.
Recent Jobs and Reviews in Independence, MO
Independence, MO at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Independence, MO between October 2025 and December 2025.
The 25 customer reviews shown here average 4.6 out of 5.
The most recent job was on December 2, 2025.
LBA Air Conditioning, Heating & Plumbing has completed 59 jobs in Independence, MO in the last 12 months. The first job there was in January 2015.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
Arrived to remedy an inoperable system. Upon arrival found that the systems inducer is clogged with condensation from the furnaces exhaust. Cleared some of the condensation and turned on the furnace. Once condensation is cleared the system will start but will accumulate more condensation as it runs. Found that the collector box is also leaking flue condensation. With all the condensation backed up inside the furnace determined it would be safe to check the furnaces heat exchanger and make sure the system will be safe to operate. Found a hole in the heat exchanger as well as the failed gasket between the primary and secondary heat exchanger. This makes the furnace unsafe to operate. Reached out to a field supervisor to provide repair and replacement options. Signed red tag with homeowner. System is inoperable at this time.
..
Changed registers will two dampened 8inch louvered grills in there IT rooms.
Today I did a full heating maintenance on 7 furnaces and 2 units heater. I checked all amp draws off all working components took temperature splits. Changed filters. And at this time all units are running as should.
Today heating checks were performed on two nat. gas split systems and one mini-split system that serves the IT room. There were two filters for the furnace on-site and they were used today. Heating check forms for the furnaces were completed and emailed. Below is a list of all hvac equipment on-site as well as the hot water heater. All tests performed today were in the proper range. All equipment is new and in like new condition. All three systems are functioning properly with no deficiencies discovered today. Thank you, Jon Equipment on-site Lennox 90% inside mech closet(qty2): EL297UH110XE60C-01//5925F04482 filter 24x24x1 EL297UH135XE60D-01//5925G00913 filter 24x24x1 Water heater: Bradford White RE330S6-1NCWW//AC53098185 (30gal nat gas) On roof: Lennox condensers (qty2) ML17KC2-060-230A02//1925F92310 ML17KC2-048-230A02//1925F98886 Lennox(Samsung) mini split outside unit MWPD024S6S-1P//1AA1PAFXA99912W In IT room Lennox(Samsung) mini split evaporator head MWMD024S6-IP//
Today the heating checks were performed. The electrical and mechanical functions were checked. In addition to this the filters were replaced. All systems checked functioned properly in their heating modes. All systems were turned back to their initial settings once the tests were completed. Thank you, Jon
Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Found that the system is operating with excessive static pressure. Verified operation of all mechanical and electronic components of the furnace. Checked blower for cleanliness and to see if there is any play in the bearings. Found that the fan for heating and cooling is heavily coated in dust debris. Checked systems heat exchanger to ensure proper venting of flue gas. Furnace is operational at this time.
This task will be doing a pull and reset on the toilet to gain access to the drain and includes a auger.
Arrived for furnace check today. Static is passing. Heat exchanger looks good. Carbon monoxide test was 0ppm. All electrical is running range. I replaced filter with one you provided. I also replaced humidifier pad. It’s working correctly. I also replaced the batteries in the thermostat. System is running at departure. Thanks for choosing LBA.
Sent over options to Tammy with financing application as well as she lives 2 hours away
Customer got declined for financing . Left my contact information in case they can figure out a financial solution
Today I looked at the unit marked number 8. Model gcs16-180-375-1 serial 5604F-01324. System will not fire in heat. I found the gas was shut off to the unit. I looked in previous invoices and found last year on dec. 2 it had the heat disabled due to a bad heat exchanger and kept tripping the roll out when the blower motor started. This will need a crane due to the size and weight of the heat exchanger. Sending info to Rick.
A bid for reouting waterlines and bathroom repair.
Completed furnace, maintenance and inspection. I checked amp draws and tested components. I wiped down the furnace and cleaned flame sensor. I checked airflow and temp splits. I had to replace the flame sensor due to the flame sensor not sensing the flame. Furnace is operating within manufacture specifications at departure.
I found the port clogged going into the pressure switch. I also found that the filter was clogged and needed changed out. I cleared out the port on the pressure switch and tested it and then turn system on and off three times to make sure everything was working fine. I replaced the air filter and replaced batteries in the customers thermostat as well. Furnace is running within manufacturer specifications at departure.
Dispatched for furnace tune-up. The components that are tested during the tuneup are heat exchanger, flame sensor, igniter, blower wheel, inducer, temp split and combustion in the heat exchanger. All components of the furnace are with in range of manufacture specifications. Thank you for allowing us in your house to provide the perfect home service and for being a member of the perfect family service club from your LBA Lead Service tech Calvin. If I provided a positive or five star experience. I’d appreciate you sharing your thoughts in a review.
10/27/25 - Completed the monthly filter change in five RTU’s. All filters were changed and all units appeared to be in good condition.
Went for a maintenance call today for heat. Tested for static pressure, system is passing when in heat. Did a combustion test is within range. Inspected heat exchanger no cracks/leaks were detected. All electrical components are passing for manufacture specifications. Did clean flame sensor and pressure switch hose. Checked temp split and is within range. System is up and running before leaving. Thank you for choosing LBA services-Johann
Arrived to do a performance maintenance. Set up for combustion analysis temperature split and static pressure tests. Verified operation of all mechanical and electronic components of the furnace. Checked blower for cleanliness and to see if there is any play in the bearings. Checked systems heat exchanger to ensure proper venting of flue gas. Performed an electronic gas leak search. Switched system to cooling. Measured a temperature split between return and supply air and amp draw of the blower motor. Went outside and verified refrigerant levels. Verified operation of all electronic and mechanical components of the condenser. Rinsed coil free of debris. Spoke with homeowner about the system. Heating and cooling systems are operational at this time.
Installed new water heater and full system
The Pickens would like to go over options and think about how to proceed . This is their first quote
Gave pricing to swap master bathrooms lav faucets with new units. Customer is opting to have son do work.
10/7/25 - Completed a full heating maintenance on four RTU’s. The filters were changed, the heat exchangers were checked, and proper operation was tested. RTU 3 has a cracked heat exchanger, which will need to be replaced. W1 has been disconnected, the gas valve has been turned off, and the gas to the unit has been shut off. The unit will not be heating until the heat exchanger is replaced, but it did seem to be running fine when tested. Overall, the other three units were in good condition, they were running well, and there were no other issues found at this time.
Customer is going to get a 2nd price
Duct clean along with the blower motor cleaning and UV light
The entire team that visited my home was great! Highly recommend.
Good service but a cannot afford them on a fixed income
Excellent
We thank you for sharing your positive experience. It made our day.
Went over everything
I was looking for more information regarding all options and Jamal was able to come in and explain the benefits and cons of each option without the pressure of feeling like I had to make a decision that day.
Cesar really took good care going through testing my system before telling me what was wrong, he also took the time to explain what was going on in a way that made sense!
Ramon was wonderful. Explained everything to me
Courteous and efficient
Friendly, courteous and professional
Friendly, courteous and professional
Friendly, courteous and professional
Robert was very friendly and explained the whole process and answered all my questions.
I am pleased with everything that happened give this guy a raise thanks for your service
Truly grateful for LBA and their great customer service. Dallas did an outstanding job and so appreciate him explaining everything to me. Highly recommend.
Very professional and informative with providing me several finance options.
Robert was very professional and thorough. Greatly appreciated.
I've already shared this with my review of Robert Shands. But will repeat that after my experience I feel like I have been the victim of a "bait and switch" con game. I called bor a $49.95 pre season furnace check and 3 hours later I'm being asked to spend $12,000 on a 5 year old HVAC system. One thing I did not include in my review of Robert Shands was that I was told that the reason the blower blade cleaning was so expensive was that he would have to take the entire bottom half of the furnace off. Well, if that's true, it took less than an hour and so I think the pricing for that cleaning was OUTRAGEOUS. Plus he used my water and my hose.
After Robert and Corbin left I kind of felt like I was a victim of the old fashioned "bait and switch" con game. I called and set up an appointment to have a pre season furnace check for $49.95. 3 hours later I am reflecting on the fact that I was asked to spend $12,000 on a 5 year old HVAC system. I don't know if all of the items suggested are needed but $12,000 is a long ways from $49.95. And at this point, I have no idea how the Membership Protection Plan works so I am going to have to call Monday to get the details.
everyone was wonderful
Great response time and very thorough estimate
Service was great! Install was quick. All issues are resolved and water softener is working great. I Will be using LBA again and referring people I know.
Very well trained and he has passion for his job
Doug and the LBA crew are miracle workers!! We had a 13 yr old water heater that was about to go, and we switched to a gas tankless unit. Doug and his crew worked the entire day to make it happen and now we have endless hot water! We are forever grateful for their perfection and quality craftsmanship! Such a professional team!! We will use them for all our plumbing/cooling/heating needs! Thank you LBA crew!!
Levin Lowery is the most knowledgeable, trustworthy, engaging and patient plumber I ever met. He answers every question, makes sure the job is done right, and if additional problems are found, he offers a variety of detailed solutions and quickly prepares a bid/s with zero pressure. Best company of its kind I've ever hired.
Nick provided me an exceptional customer experience! He was very professional, knowledgeable, and answered all my questions. I’ll continue to use LBA for all my plumbing, cooling/heating needs.