Independence, MO Residential HVAC & Plumbing Services
LBA Heating, Cooling, Plumbing & Electrical was started by people just like you who want and insist on high quality and reliable service. In Independence, MO and throughout the Kansas City area, we treat each family and home as if it were our own. That includes rising to the challenge of being a Hero any time the need calls for extraordinary measures.
From routine maintenance to 24/7 emergency repairs, LBA Heating, Cooling, Plumbing & Electrical has you covered for all your home plumbing, heating, and air conditioning needs. The same goes for new and replacement system installations. Read our reviews and find out why your neighbors consider us to be their nearby heating and air company and local plumber in Independence, MO.
Recent Jobs and Reviews in Independence, MO
Independence, MO at a glance
LBA Air Conditioning, Heating & Plumbing has completed 25 jobs in Independence, MO between September 2024 and October 2024.
The most recent job was on October 10, 2024.
LBA Air Conditioning, Heating & Plumbing has completed 59 jobs in Independence, MO in the last 12 months. The first job there was in January 2015.
Our Local Reviews by City
- Adrian, MO (2)
- Avondale, MO (1)
- Basehor, KS (24)
- Bates City, MO (1)
- Belton, MO (33)
- Blue Springs, MO (72)
- Bonner Springs, KS (30)
- Buckner, MO (1)
- Bucyrus, KS (6)
- Columbia, MO (1)
- De Soto, KS (25)
- Dearborn, MO (1)
- Edwardsville, KS (14)
- Eudora, KS (9)
- Fairway, KS (93)
- Freeman, MO (1)
- Gardner, KS (14)
- Gladstone, MO (65)
- Grain Valley, MO (58)
- Grandview, MO (75)
- Greenwood, MO (3)
- Holt, MO (3)
- Houston Lake, MO (7)
- Independence, MO (184)
- Kansas City, KS (427)
- Kansas City, MO (2902)
- Kearney, MO (3)
- Lake Lotawana, MO (4)
- Lake Quivira, KS (22)
- Lake Waukomis, MO (4)
- Lake Winnebago, MO (1)
- Lansing, KS (2)
- Lawrence, KS (19)
- Leavenworth, KS (8)
- Leawood, KS (429)
- Lee's Summit, MO (164)
- Lenexa, KS (608)
- Liberty, MO (116)
- Lone Jack, MO (1)
- Louisburg, KS (5)
- Merriam, KS (21)
- Mission, KS (204)
- Mission Hills, KS (78)
- North Kansas City, MO (10)
- Northmoor, MO (1)
- Oak Grove, MO (13)
- Odessa, MO (1)
- Olathe, KS (632)
- Ottawa, KS (1)
- Overland Park, KS (1458)
- Paola, KS (1)
- Parkville, MO (191)
- Peculiar, MO (1)
- Platte City, MO (13)
- Pleasant Hill, MO (1)
- Pleasant Valley, MO (4)
- Prairie Village, KS (527)
- Prairie Village New, KS (2)
- Raymore, MO (27)
- Raytown, MO (84)
- Riverside, MO (18)
- Roeland Park, KS (189)
- Shawnee, KS (1045)
- Shawnee Mission, KS (2)
- Smithville, MO (1)
- Spring Hill, KS (13)
- Stilwell, KS (66)
- Sugar Creek, MO (7)
- Weatherby Lake, MO (31)
- Wellsville, KS (1)
- Westwood, KS (30)
- Westwood Hills, KS (18)
Job Locations and Reviews
.
Replaced the filters in all five rooftop units and visually checked the units. There is one unit not in service that has been previously documented.
10/9/24 - Completed a full heating maintenance on all equipment. Filters were changed and proper operation was tested. Overall, all equipment was in good condition, it was all running well, and there were no issues found at this time.
Sold
Sold
Sold
Sold
Funace heat exchanger is compromised/no longer sealed. Smaller heat exchanger tubes from from the rear collector box are loose. Gas is off to the furnace. Jared and Gaylynn have been advised not to run it in heating mode. Indoor fan assembly is dusty. Jared mentioned he and his wife suffer from allergies. Because of this we are offering a whole home air purity system to remove allergy aggrevating irritants from the air they breathe while in their home.
Vm for reschedule call
Quoted to pump out water in basement, 1/2 day New sump pump Extended discharge line Dedicated outlet if needed
Rob worked on a bid
WARRANTY: System is low on refrigerant. Confirmed refrigerant leaks at the indoor and outdoor coils. Contacted distributor to order necessary components for warranty replacement. Once those components are on hand, office will schedule a return service appointment.
Out today for ABS shower drain upstairs leaking into kitchen below. Upon inspection, there is easy access to the line. Quoted homeowner tier two repair due to easy access. Homeowner declined repair due to price and non-immediate availability of tub shoe. However, he may call us on Monday to schedule work as bid. Cleaned up work area did not collect; gave estimate only. Imperative note, homeowner is longtime member.
10-4-24 Body cooler refrigeration system is down again. Today I found bubbles in my cycle. I located a leak at the dual pressure control switch and also had a problem with the condenser fan motor switch not working properly. I picked up the parts. They’re on my truck. I have to get with Jim to schedule a time to put these in.
Estimate
Customer declined my inspection
Estimate
Estimate
Install 80k btu, 80% furnace
Went for a furnace maintenance today. Did a static pressure test first, it failed. Next I checked for a carbon monoxide leak, my CO detector picked up a leak. After checking the heat exchanger, I found a crack and a severe amount of rust. The unit is red tagged and gas is shut off to the unit. Thank you for choosing LBA services!
.
Jacob stated that the condensate pump had fallen, and this was the cause of the water build-up. A plumber reran the drainline and set the condensate pump on the floor. Tested the pump twice with full loads of water. Pump functions properly. No visible leaks. Complementary heating check scheduled for October 18.
Estimate
We will be installing a 95% furnace. We will also be adding a second return off the back of the furnace. we will also be increasing the return duct drop leading into the furnace.
For this job, I was showing up on a call for no heat. first thing I noticed was that capacitor on the inducer had failed. I replaced. The capacitor for the inducer but the inducer was not pulling pressure. I did notice that the inducer was also most likely damaged, and will need to be replacing. I looked at the inducer flue line and found that it was clogged outside by a Birdsnest, and also breaking apart slightly inside the house. I repaired the inside portion and then cleared out the Birdsnest and all the sticks that were clogged into the inducer, exit flue port. I was able to get the inducer running, and the furnace fired up. However, I could smell gas and my carbon dioxide detector was showing carbon dioxide. After checking the heat exchanger, I found cracks and holes which were most likely caused from overheating due to all the other issues. Because of this, I have red tagged the unit , and it is most likely that replacement is far better option then repairs considering the scope